A university professor and related leaders of the aluminum factory visited AdTech Recently, General Manager Ivans invited a university professor and related leaders of the aluminum factory to observe the guidance of AdTech. Testing laboratory - new product exchange In the morning, General Manager AdTech in-depth communication with the...
Ceramic Fiber Taphole Cones Hello everyone, welcome to see the small series of articles, today and everyone to introduce the relevant knowledge about Ceramic Fiber Taphole Cones, we all know that there will be a lot of high temperature melting in industrial production, but the high...
Refractory Ceramic Fiber Cone Aluminum silicate high temperature plug description: It is a ceramic fiber shaped product that is oriented to meet the fire resistance and heat insulation of special parts of certain thermal equipment. The product is non-brittle material, high in strength and accurate in size....
Ceramic Fiber Taphole Cone All aluminum silicate high temperature plug products have a low shrinkage over their temperature range and are highly insulating, lightweight and impact resistant. Unburned materials are easily cut or machined, and the product is resistant to abrasion and spalling during use and is...
Ceramic Fiber Drain Cones The high-temperature plug is made of high-alumina fiber, which is changed from the original hand-made process to the vacuum suction filter automatic equipment forming process. The production efficiency is high, the quality stability is high, the yield can reach 99%, the distribution...
Ceramic Fiber Cone MATERIALS FROM CERAMIC FIBER Ceramic fibers based on aluminum silicate are obtained by melting a mixture of quartz with aluminum oxide at a temperature above 2000 ° C, followed by spraying the melt in a gas stream. With this method, standard amorphous or polycrystalline...
Taphole Plugs Cone Taphole Plugs Cone uses high-purity ceramic fiber to add inorganic and a small amount of organic binder mixed in different proportions, formed by vacuum equipment dehydration, then dried, and then precision mechanical finishing. The product has good mechanical strength, precision and erosion resistance. Taphole...
Aluminum Tap Cone Aluminum Tap Cone is a ceramic fiber shaped product that is produced in order to meet the fire resistance and heat insulation of certain special parts of thermal equipment. The product is non-brittle material, high strength, accurate size, and can be produced in various...
Refractory Ceramic Fiber Cones Refractory Ceramic Fiber Cones is made from high-grade silicate fiber and other formulations by vacuum forming. Refractory Ceramic Fiber Cones Physical and Chemical Indicators Color: white Composition: Si0263.3% AL20336% Ti02 0.5%Fe2030.1% Other <0.1% Density: 0.30-0.35g/cm3 Thermal performance: heat resistant temperature 1100 ° C Maximum operating temperature: 1000 °...
Ceramic Fibre Cone used for molten aluminium Ceramic Fibre Cone is made of loose cotton by wet vacuum suction molding to be dried and calcined to produce various fiber products with different weight, specifications, models and properties. Because of its excellent production equipment and stable raw...