Ceramic Fiber Plugging Cone taper is generally 10% to 15%, in order to reduce the heat loss of aluminum water surface, reduce metal consumption and easy to take off the cap. The corner radius and the radius of the corner of the insulating cap are beneficial...
Top Out The Cone can fall freely with the condensation of aluminum ingots, so that the aluminum ingot does not cause transverse cracks due to suspension. Because of its small heat capacity and extremely low thermal conductivity, the ratio of the volume of the cap to...
Alumina Silicate Cone is a metallurgical terminology Ingot casting equipment for sedating aluminum aluminum ingot head aluminum water insulation Its function is to keep the aluminum water in the thermal insulation cap portion liquid for a long time, so as to continuously supplement the volume shrinkage of...
Aluminium Silicate Plug Cone has a tough texture and strong wind erosion resistance; no gap lining; low heat storage and low heat loss; It is in direct contact with flame for hot surface; excellent construction, installation performance, excellent thermal shock resistance, high compressive strength, long service...
Aluminum Silicate Stopper Cone is made from high quality ceramic fiber cotton and is made by vacuum forming. The purpose of developing this product is to produce a rigid and self-supporting product with superior high temperature performance. Aluminum Silicate Cone is a product that meets the...
Tap Hole Cones are made of high-purity ceramic fiber by adding inorganic and a small amount of organic binder in different proportions, and is formed by dehydration by vacuum equipment. Then dry processing, and then precision mechanical finishing, the product can have good mechanical strength, precision...
Ceramic Fiber Cone Plug has a low shrinkage over its temperature range Maintain high insulation, light weight and impact resistance. Unburned materials are easily cut or machined. The product is resistant to abrasion and spalling during use and is not wetted by most molten metals. Ceramic Fiber Cone Plug...
Alumina Silicate Fibre Cone Parameter Density plugging class 0.30-0.35g/cm3 Thermal performance heat resistance temperature 1100 ° C Maximum operating temperature 1000 ° C Continuous use temperature 800 ° C Thermal conductivity is 0.77w/m.k at 720°C Permanent linear shrinkage less than 0.6% after 24 hours at 760 °C Dimensional size sleeve type length...
Aluminum Silicate Fiber Cone is a ceramic fiber thermal insulation cap product that is oriented to meet the fire resistance and heat insulation of certain special parts of thermal equipment. The product is non-brittle material, high strength, accurate size, can be made according to customer needs...
Aluminium Silicate Cone Foundry is available in a variety of sizes and shapes, including tubular, tapered, dome and square boxes. Aluminium Silicate Cone Foundryv can be produced according to customer's requirements, but some products can also be used for inventory, such as casting caps and casings...