Alumina Silicate Fibre Cone

Alumina Silicate Fibre Cone

Alumina Silicate Fibre Cone

Alumina Silicate Fibre Cone Parameter
Density plugging class 0.30-0.35g/cm3
Thermal performance heat resistance temperature 1100 ° C
Maximum operating temperature 1000 ° C
Continuous use temperature 800 ° C
Thermal conductivity is 0.77w/m.k at 720°C
Permanent linear shrinkage less than 0.6% after 24 hours at 760 °C
Dimensional size sleeve type length dimension ±3mm thickness ±1mm
Alumina Silicate Fibre Cone surface quality single block defect area is less than 25 mm2 bump height is not higher than 2mm outer surface without large damage and lack of speed, etc.

Alumina Silicate Fibre Cone

No Comments

Sorry, the comment form is closed at this time.