19 9月 Ceramic Fiber Taphole Cones
Ceramic Fiber Taphole Cones
Hello everyone, welcome to see the small series of articles, today and everyone to introduce the relevant knowledge about Ceramic Fiber Taphole Cones, we all know that there will be a lot of high temperature melting in industrial production, but the high temperature liquid after high temperature melting will enter through the flow cell The mold then forms the supplies that are commonly used in everyday life. Have you noticed a word here? Correct! ! ! That is the flow cell. Because there are many paths in the flow cell, the flow cell can not be replaced frequently, so a material is extended – “high temperature plug”. The high temperature plug is divided into several categories: thermal cap, plugging. Set, aluminum silicate high temperature plug, aluminum water plug, aluminum silicate plug, so it is well understood, one of its biggest uses is to change the path of high temperature liquid in the flow cell, which is commonly used in industrial production. Word – control flow.
Here I know that there is a high-temperature plug. The high-temperature plug produced by (Evans) is made of high-aluminum fiber, which is transformed from the original hand-made process into a vacuum suction filter automatic equipment forming process with high production efficiency and high quality stability. The yield can reach 99%; the distribution of the plastid is uniform, the hardness is higher than the ordinary plug, the blockage is tight, the non-stick aluminum is not slag, and the metal liquid is controlled for flow interception in the box and the kiln.