Alumina Filter Export

Alumina Filter Export

Alumina Filter Export

Alumina Filter Export is made of non-stick aluminum, and the product is white or milky white. It is suitable for the purification process of producing high-quality, high-demand aluminum and aluminum alloys.
Through physical adsorption and chemical action, it can effectively remove various oxidized inclusions produced in the aluminum smelting process, thereby reducing casting defects and improving casting quality.

Alumina Filter Export should be preheated before using CFF, the filter plate should be completely sealed in the aluminum water filter box, to ensure that all aluminum water passes through the filter plate, and the total filtering capacity shall not exceed the prescribed limit. If the flow rate is too high, it should be adjusted through multi-stage filtering or reducing the flow rate.
The performance characterization results show that the porosity of the foam material after adding the modifier reaches more than 90%, the compressive strength reaches 2Mpa, and the shape stability of the material is taken into consideration.
Adding about 8% of bentonite to the basic components can make the modification effect of the filter tank of the aluminum factory reach the best state.

Alumina Filter Export

The results show that the higher the crystallinity of the foam ceramic base material, the higher the room temperature strength of the material.
Alumina Filter in the aluminum plant uses high-quality and high-purity zirconia as the raw material, with a unique formula and advanced environmental protection technology.
The three-dimensional network structure is uniform, high strength, stable texture, no slag, high temperature resistance, and strong thermal shock resistance.
Australian foam filter manufacturers are suitable for purification and filtration of high-temperature aluminum and aluminum alloy solutions. It can filter non-metallic slag and micron slag to make the surface of castings smoother.
In order to reduce the processing loss, the filter can make the aluminum liquid fill the cavity more uniformly, and the molten metal has a higher tendency of turbulence during the pouring process.
After passing through the three-dimensional pore structure, the turbulent flow is finally transformed into a very stable laminar flow, which can better fill the cavity.
The impact corrosion of the metal solution to the casting cavity is reduced, the rejection rate is significantly reduced, the production cost is reduced, and the labor productivity is improved.
When aluminum and aluminum alloy are dissolved, the filter tank front of the filter tank of the aluminum factory forms a smooth filter tank cavity.

The filter front box products provided by sales@adtechamm.com have excellent heat resistance, aluminum resistance, solution corrosion resistance, good heat preservation performance, high strength, strong resistance to mechanical impact, and standard forming dimensions. The filter plate provides reliable support for the filtration efficiency.
In addition to general specifications, it can also be customized according to customer needs.

No Comments

Post A Comment