Adtech Ceramic Foam Filter for aluminium is the most widely used filter in the field of aluminum melt filtration. The advantages are high porosity, high filtration efficiency, easy replacement, low cost, strong adaptability, and can also be separated by filtering solid inclusions in liquid inclusions;...
Sell Casting Filter to Rusal and get feedback on high quality products. According to Rusal, it removes the inclusions between the refining system and the mold table. The ability of the ceramic foam filter to capture these inclusions is important to maintain a clean ingot during...
Aluminium Cff Factory produces aluminum casting ceramic foam filters that can remove metal slag, and the solution of metal impurities is much stronger than several other filter media, and combines physical and chemical principles to filter it. The large impurities on the filter surface include physical...
Foundry Filter Factory produces aluminum water foam ceramic filter plates, which use a three-dimensional network structure and organic bubbles connected to the holes as a carrier to penetrate thixotropic alumina slurry. The slurry was uniformly applied to the foam skeleton of the carrier, and baked and...
Filter Foundry Factory can effectively remove various impurities in molten aluminum. Sealing ceramic fiber gaskets are attached around the filter plate to help seal the filter plate in the filter box to ensure that no aluminum liquid flows out from the side. Filter Foundry Factory provides...
Casting Filter Factory is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to provide customers with quality products!...
Cff Filter Factory provides aluminum factory filters, industrial aluminum filters, ceramic foam filters, and microporous ceramic filters. Cff Filter is made of non-stick aluminum material, which has the characteristics of non-stick aluminum. The product is white or milky white. Through physical adsorption and chemical action, it is suitable...
Metal Foam Filter Factory AdTech has developed a new type of molten metal foam filter in recent years to reduce casting defects. Metal Foam Filter has the characteristics of light weight, high mechanical strength, large specific surface area and high porosity. Molten metal has excellent thermal shock...
Zirconia Filter Factory produces a new type of industrial ceramic products for aluminum melting and casting purification. It has a low bulk density (0.25-0.65) g/cm3, high porosity (60%-90%) and a three-dimensional network structure. Due to its excellent properties such as high temperature resistance, chemical corrosion resistance, and...
Sell Ceramic Foundry Filter which can improve the quality of finished products (foil, block, ingot, rod, profile, etc.) and meet the requirements of high purity cast metal. It reduces the scrap rate of the final product and improves the quality. The filter usually uses a standard...