Casting Line Trough is a tool for conveying liquid aluminum. The molten aluminum is transported from the holding furnace mouth to the mold splitter tray. In order to prevent the aluminum liquid from falling too much, the conveying distance of the open flow trough is...
Launder Systems For Aluminium uses gravity to transport molten aluminum from one location to another. The system usually includes a hot-faced refractory, insulation backing, steel frame, retaining ring and other high-temperature equipment such as thermocouples and gaskets. They are most commonly used to transport metal from...
Thermal Efficient Launder Systems is used for the transfer and transportation of molten aluminum between aluminum melting furnaces and from furnaces to various casting equipment. These launders all adopt a grooved structure with a steel shell, and the launders are assembled in sections by prefabricated refractory...
Electric Heated Launder System includes a launder frame; a launder preform set in the launder frame. An insulation layer provided between the launder preform and the launder frame. An electric heating element arranged between the thermal insulation layer and the launder preform. The Electric Heated Launder System heats...
Launder System For Aluminium allows liquid aluminum to flow between smelting furnaces, holding furnaces and other processing equipment in accordance with the steps of the process. The launder is connected to the liquid aluminum outlet and leads it to the next device, and the equipment in...
Molten Metal Launder Systems is equipped with launder covers to prevent dangerous and expensive leaks, has gentle heating to maintain a constant molten aluminum temperature, and is highly insulated to prevent energy loss. It can be customized to any casting unit or casting layout. Aluminum, silver-white...
Cast Rolling Tip Cavity is a key component that directly feeds the aluminum melt into the high-throughput continuous casting and rolling mill, and its material and structure are very important. Cast Rolling Tip Cavity structure can be adjusted according to the production situation. In the production...
Cast Rolling Castertip consists of two upper and lower plates, connecting the side baffles of the two upper and lower plates, and a bottom plate connecting the two upper and lower plates and two side baffles. The middle of the bottom plate is provided with...
Cast Rolling Lip is used for aluminum liquid forming of aluminum plate and aluminum strip Cast Rolling. For the nozzle structure using the laminar flow model, the simulation results of the internal aluminum liquid flow are basically consistent with the water model experiment results. For the nozzle...
Feeder Nozzle Cavity casting nozzle support panel is a key component of the electromagnetic casting and rolling process, and its structural stability is directly related to the planar stability of the casting nozzle. It is made of refractory fiber mat. The fiber mat contains approximately equal...