Ceramic Foam Filter for Aluminum Casting Foundry is a modern material in demand in many industrial fields. It is made from highly dispersed mineral powders, as well as from liquid foams; has a porous structure. The unique properties of this material make it simply indispensable in...
Zro2 Molten Metal Filter for filtering gray and ductile iron, as a rule, are used for installation in foundry half-molds of the bottom in specially provided for this recess. Ceramic foam effectively cleans metal melts when casting into single sand molds, metal chill molds and...
Aluminium Foam Filter for filtering the melt from cast iron, steel, bronze, brass, aluminum and other non-ferrous alloys. Filters are characterized by high thermal conductivity, durability and resistance to sudden changes in temperature, so they can be used in the filtration departments of gating systems even...
Foundry Filter Ceramic Foam Overview In recent years, porous ceramic filters (PCF) with porosity up to 90% and pore size of 0.5-5.0 mm are widely used abroad in foundry and steelmaking. The use of Foundry Filter Ceramic Foam increases the purity of products and reduces the amount...
Ceramic Foam Filter Foundry is used in the metallurgical industry and foundry. With Ceramic Foam Filter Foundry , you can solve all the problems associated with the presence of inclusions. From the point of view of casting quality, filtering provides an increase in the mechanical and...
Alumina Foam Filter The metal flow passes through a system of branched channels. Small particles that did not linger on the filter surface, as they turned out to be too small, continue to move along with the metal flow inside the network of filter channels. During filtration,...
Poroous Foam Filter Casting of the front frame of a jet engine with a diameter of 82 cm and a mass of 40 kg is made of Al-alloy (A 201) by sand casting. In the manufacture of such castings using steel grids in the body of the...
Tap Cone for cast aluminum industry: It is a ceramic fiber shaped product that is oriented to meet the fire resistance and heat insulation of special parts of certain thermal equipment. Tap Cone is a non-brittle material with high strength and accurate dimensions. It can be...
Most aluminum smelting furnaces or holding furnaces in the aluminum foundry industry have aluminum nozzles that are sealed with high temperature ceramic Taphole Cone. The ceramic fiber Taphole Cone is also called the water furnace mouth insulation plug, insulation plug, insulation plug, insulation cap, insulation plug. Our...
Ceramic Fiber Tap Cones is made of high quality ceramic fiber cotton vacuum forming process with high temperature performance rigidity and strength. It has low heat shrinkage, high heat insulation, light weight and impact resistance. It meets the high temperature insulation requirements of certain industrial sectors. Due...