Lanik Foam Ceramic Filter should be based on the quality requirements of the casting and the number of inclusions in the molten aluminium to determine the pore size of the filter. The size of the filter is determined based on the pouring speed and pouring...
Ceramic Filters Malaysia explains the mechanism and usage suggestions of foam ceramics for casting Filtration mechanism of ceramic foam filter The ceramic foam filter separates the inclusions in the liquid casting alloy through three physical and chemical effects on the molten metal, so as to achieve the...
Alumina Ceramic Foam Filters use polyurethane foam as a carrier and immerse it in a slurry made of ceramic powder, binder, sintering aid, suspending agent, etc. Then squeeze out the excess slurry so that the ceramic slurry is evenly coated on the carrier frame to...
Ceramic Foam Filters are used to filter aluminum and aluminum alloy melts Aluminum surface has a layer of uneven thickness of oxide film, sometimes also adsorbed water, mixed with ash and sand, sticky oil, coated with paint and so on. During melting, the aluminum material is...
Aluminum Tap Cones is mainly made of high-grade silicic acid fiber and other formulas through vacuum forming. The plugging sleeve is used in aluminum smelting furnaces, static furnaces and other aluminum tapping furnaces. It is suitable for aluminum smelting furnaces, refining furnaces, static furnaces, and...
Tapout Cones, according to user design requirements, uses loose cotton to be formed by wet vacuum suction, dried and calcined to produce high-temperature aluminum water plug plugs with different bulk density, specifications, models, and performance. In addition to satisfying various complex thermal requirements of users, each...
Tap Hole Cones uses high-quality ceramic fiber cotton as the raw material and is made by vacuum suction molding process to meet certain high-temperature production links in steel mills, aluminum plants and other industries or special-shaped products that require throttling during production. Each product is...
Refractory Cones are made of high-aluminum fiber and control or prevent the flow of liquid aluminum to accurately cast aluminum and aluminum alloys. From the original manual process to the vacuum suction filtration automatic equipment molding process, the production efficiency is high and the quality is...
Refractory Tap Out Cones are made of high aluminum fiber. From the initial manual process to the vacuum suction filtration automatic equipment molding process, the production efficiency is high and the quality is stable. The mass distribution is even, the hardness is higher than the ordinary...
Tap Cones the thermal performance is 1100℃, the maximum working temperature is 1000℃, and the continuous working temperature is 800℃. The thermal conductivity at 720°C is 0.77W/m.k, and the permanent linear shrinkage at 760°C for 24 hours is less than 0.6%. Overall dimensions: plug-in length ±3㎜, thickness...