News

Aluminium Refining Flux for wheels is used for refining and degassing the melt in the smelting process of automobile wheels. Use parameters 1. Refining temperature: 700~730℃ 2. Refining time: 8~15 minutes 3. Dosage 2~5kg/T aluminum Instructions Add the required amount of refining agent to the inside of the refining tank and...

Aluminium Refining Agent has a good effect on the discharge of non-metallic inclusions. However, in addition to the physical and chemical properties of the flux, the degree of purification of the non-metallic inclusions in the melt depends largely on the refining process conditions , Such...

Aluminium Refiner is used in the purification process of aluminum alloy melts. Classification of fluxes. Requirements. Composition of commonly used fluxes. Scope of application and methods of use. In the smelting process of aluminum and aluminum alloys, hydrogen and oxidized inclusions are the main substances polluting...

Aluminium Refine Agent removes gases and solid non-metallic inclusions from the melt through physical, chemical or physicochemical interactions in aluminum and aluminum alloy melts. Due to its small density, high specific strength, good electrical conductivity, beautiful outer tube and moderate price, aluminum and its alloys are...

Aluminium Deslagging Agent is a white powder or granular flux. It is prepared by mixing a variety of inorganic salts after drying and mixing in a certain proportion. It is mainly used to remove hydrogen and floating oxidized slag inside the aluminum liquid. Only by understanding...

Aluminium Refine Flux testing formula identification, the main components of the smelting aluminum smelting agent, aluminum casting casting smelting agent formula analysis, aluminum liquid smelting agent composition testing, refining agent formula reduction, the main components of aluminum alloy smelting agent identification Chengdu Adtech China. Refining Flux...

Scrap aluminum recycling often contains organic non-metallic impurities such as paints, oils, plastics, and rubber. Before returning to the furnace for smelting, it must be removed. For wire scrap aluminum, measures such as mechanical grinding or shear stripping, heating stripping, and chemical stripping can generally be used. At...

Production process of aluminum alloy doors and windows includes casting preparation, extrusion molding, heat treatment, surface treatment. Casting preparation The process includes the main steps of batching, smelting, casting, soaking and so on to form an ingot with a certain chemical composition and shape. The prepared raw materials...

40 ppi Cff manufacturer: Defect analysis and solutions for casting aluminum alloy ingots In the production process of cast aluminum alloy ingots, if improper control occurs, various product defects often occur, especially aluminum-silicon alloys such as ADC12 and A356. Segregation of chemical components in ingots The phenomenon...