News

Molten Aluminum Filter Molten Aluminum Filter remove inclusions which are generated between the refining system and the mold table. The ability of the ceramic foam filter to capture these inclusions is critical to maintaining a clean ingot during the solidification of metal. Accordingly, the quality and the productivity...

Liquid Aluminum filter It’s very important to choose and design Liquid Aluminum filter model & filter seat correctly according to casting types and pouring weight. The general principle is that the whole gating system should be a system without pressure to ensure that the molten metal liquid...

Ceramic Filters For Foundry Description 1>. 3D reticulate structure 2>. High mechanical strength, no-dregs off when flapping 3>. High porosity 4>. Large surface areas, strong absorptivity of impurities 5>. Excellent thermal shock resistance 6>. Rapid improvement in yield Ceramic Filters For Foundry Application Filter-PAl ceramic foam filter can effectively remove and absorb large...

Produce Alumina Ceramic Foam Filters To be used in release of heat in various levels during casting, ceramic foundry filter need to be stronger. The best quality materials are used in filter manufacturing. The filters classified as per their strength, accuracy, and tensile strength. For casting various kinds...

Ceramic Fiber Sprue Bushing Ceramic Fiber Sprue Bushing is also known as sprue cup and insulating sleeve. It is a part on the low pressure casting machine for a-lloy wheel and other similar casting. Sprue bush is used to form low pressure runner. Aluminium titanate sprue bush...

Online Aluminum Degassing Online Aluminum Degassing is based on the principle that dissolved hydrogen gas will move from an area of high concentration (in the melt) to an area of low concentration (in the inert gas). Hydrogen gas disperses in molten metal as it would if...

Aluminium Refractory Launder Aluminium Refractory Launder is a channel, normally internally lined, used for the transfer of molten aluminium. Alfiso Launder is a good insulator, non-wetted by the molten aluminium, exhibit excellent mechanical strength including resistance to metal wear and physical damage. We recommend to use ceramic...

Ceramic Fiber Tap Out Cones Ceramic Fiber Tap Out Cones are designed to meet specific application requirements in a wide range of industries. We build these products with diverse thermal properties by employing a wide variety of formulas and manufacturing processes for our vacuum-formed products. The...

Ceramic Fiber Tube AdTech’s flow control bar and flow tube are used in low pressure casting to adjust flow of molten aluminum. The flow tube is also known as stopper, and flow tube also known as ceramic alumina tube. They always use cooperatively and use for...