Aluminium Ceramic Filter Aluminium Ceramic Filter is produced basing on carrier with solid reticular structure and combined organic foam pores. The Filter is installed in the filter bowl for filtrating impurity in molten aluminum alloy, which helps to meet the requirement of production in high value-added, high-tech...
Alunima Foam Filter Alunima Foam Filter,Aluminum Factory Filters,Aluminum Industrial Filters,Foam Ceramic Filters,Microporous Ceramic Filters. Alunima Foam Filter is made of non-stick aluminum material. It has the characteristics of non-stick aluminum. The product is white or milky white. Alunima Foam Filter is suitable for the production of high quality and high...
Porous Ceramic Filter Plate Porous Ceramic Filter Plate is a new type of porous ceramic material with a porosity of 80%-90% and a three-dimensional network skeleton structure and through-holes. It has many advantages such as stable chemical properties, high strength, high temperature resistance, good thermal shock resistance...
Zro2 Ceramic Foam Filter Zro2 Ceramic Foam Filter is made of zirconia ZrO2. Its heat-resistant temperature is higher than about 1760 ° C, with very high strength and excellent high temperature impact. Aluminium Casting requires aspects of high strength and elongation requirements. Therefore Aluminium is very sensitive...
Al2O3 Ceramic Foam Filter Al2O3 Ceramic Foam Filter(CFF) System employs dedicated ceramic foam filter to remove inclusions which are generated between the refining system and the mold table. The ability of the ceramic foam filter to capture these inclusions is critical to maintaining a clean ingot during...
Zirconia Ceramic Filter Zirconia Ceramic Filter is a type of ceramic filter plate. The zirconia-based ceramic slurry is uniformly applied to the three-dimensional network structure and the organic foam of the communicating pores as a skeleton of the carrier, and then dried and solidified and then...
Ziroconia Filter Ziroconia Filter has been widely used in the aluminum processing industry. There are two main modes in the application of deformed aluminum alloy melt purification technology. In-furnace fluxing and refining, semi-continuous casting of foamed ceramic plate filtration outside the furnace, ceramic filter plate replacement is...
Porous Foam Ceramic Filter Porous Foam Ceramic Filter removes metal impurities from metal slag and solution, far stronger than other filter media, and combines it with physico-chemical filtration. The large impurities on the Foam Ceramic Filter surface are physical sieves, retentate and tiny impurities with chemical affinity...
Ceramic Filter Plate A general term for aluminum-based alloys based on aluminum. The main alloying elements are copper, silicon, magnesium, zinc and manganese. The secondary alloying elements are nickel, iron, titanium, chromium and lithium. The aluminum alloy has low density, but high strength, close to or exceeds high-quality...
Alumina Foam Ceramic Filter Alumina Foam Ceramic Filter from AdTech Metallurgical Materials Co., Ltd has been focusing on research, development, production and marketing of the adhesive ceramic foam filter(CFF) for aluminum alloy casting Since 2012. Advantages for Alumina Foam Ceramic Filter Adopt adsorption principle for filter, can effectively...