News

Aluminium recycling process Why Aluminium should be Recycled: Aluminium is 100% recyclable and experiences no loss of properties or quality during the recycling process. Recycling aluminium also uses only 5% of the energy used to create new Aluminium and emits only 5% of the greenhouse gases....

Launders For Aluminum Melting Furnace Our refractory technologies may allow producers to eliminate Launders For Aluminum Melting Furnace, avoid the need to "super-heat” the metal in in-line equipment and, most importantly, reduce holding furnace temperatures . Rex Materials' Fusion SL precast refractory launders are extremely abrasion...

Die-cast aluminum alloy Al-Si alloy The Al-Si alloy has the characteristics of small crystallization temperature interval, large solidification latent heat of the silicon phase in the alloy, large specific heat capacity, and small linear shrinkage coefficient. Therefore, its casting performance is generally better than other aluminum alloys, its...

Control of Molten Metal Flow The ways to gain better quality and higher casting performance is an urgent topic among aluminium producers today. This issue is also often on the agenda at conferences like this and the subjects and technologies to achieve this varies. Controlling the molten metal...

Molten Aluminium Flow Box 1. Molten Aluminium Flow Box comprising: an upper rectangular-shaped section; a lower inverted pyramidal-shaped section; a unitary dual nozzle assembly located in a bottom region of the lower inverted pyramidal-shaped section. 2. Molten Aluminium Flow Box comprising: an upper rectangular-shaped section; a lower inverted pyramidal-shaped section housing a...

Foam ceramic filter plate The foam ceramic filter plate produced by our company can effectively remove all kinds of impurities in the aluminum liquid, and the sealing ceramic fiber gasket is affixed around the filter plate, which helps to seal the filter plate in the filter...

PAL Ceramic Filter Plate PAL Ceramic Filter Plate is an aluminum-water foam ceramic filter, which adopts a three-dimensional network structure and an organic bubble communicating with pores as a carrier, infiltrates the thixotropic alumina slurry, and uses a four-center correction center distance automatic extrusion process. The...

Aluminum Casting Using Alumina Ceramic Foam Filter Aluminum Casting Using Alumina Ceramic Foam Filter include Reduce gas and inclusions that are contained in the casting, reduce the turbulence level of molten metal when filling the mold, reduce surface defects in castings, and significantly reduce the rejection rate...

CFF Ceramic Foam Filter CFF Ceramic Foam Filter mainly for filtration of aluminum and alloys in foundries and cast houses .With the excellent resistance to attack and corrosion from molten aluminum, the filter can effectively remove inclusions, reduce trapped gas and provide laminar flow and then...

Aluminum alloy melt purification Aluminum alloy purification method can be divided into adsorption purification and non-adsorption according to its principle of action, two basic types. Adsorption purification refers to the direct reaction of the aluminum melt with the adsorbent (such as a gas, a liquid, a...