News

Foundry Foam Ceramic Filter for Molten aluminium RESEARCH OF THE STRUCTURE OF FILTER AND PECULIARITIES OF FILTRATION OF IMPURITIES OF POROUS CERAMICS FROM ALUMINUM OXIDE Al2O3 / Research of structure of the filter and features of impurity filtering by porous ceramics from Al2O3 aluminum oxide The feature...

Zirconia Foam Filters perform the following functions Purification of molten metal from metal and non-metal components; Reducing the amount of oxides during the formation of a turbulent flow; Increasing the fluidity of the metal; Elimination of inclusions and metal defects; Improving casting quality due to improved mechanical properties; Reducing the formation...

Ceramic Zro2 Foam Filter Today, the most promising direction in the field of industrial use of reticulated polyurethane foam is the production of Ceramic Zro2 Foam Filter. Using these filters, various impurities in metal castings are eliminated due to their open-porous structure. During casting, molten metal flows...

Ceramic Filter Supplier Ceramic  Filter application temperature - up to 1700 ° C (with short-term use, higher temperatures are also possible). To ensure optimal filter efficiency, they must be preheated. Three types of ceramic foam filters are offered, which are made on the basis of: aluminum oxide (for...

15 Inch Ceramic Filter Ceramic foam filters for cleaning metal melts from non-metallic inclusions and oxide films Ceramic foam filters are used in the metallurgical industry and foundry to clean metal melt from non-metallic inclusions and oxide films, which helps to eliminate many shortcomings, improve the quality...

Molten Metal Foam Filter Smelting aluminum alloys presents a number of difficulties. The low density of aluminum alloys contributes to the formation of gas shells and porosity, since gases easily penetrate into the metal medium and saturate it. Aluminum is easily oxidized. It is difficult to...

Degassing Of Aluminium Degassing Of Aluminium has received wide development and distribution in industry over the past decade, to obtain the lowest stable level of gas content in a metal in modern conditions, In shaped casting, this method is used to degass relatively small volumes of metal...

Aluminium Ingot Degassing Machine A characteristic feature of the refining of aluminum melts with chlorine is the formation of “dry”, free-flowing slag, which is easily separated from the molten metal, in contrast to the porridge-like “wet” slag, which is formed by purging with neutral gases. This...

Zro2 Porous Ceramic Filter Filtration of melts has now become an integral part of the technological process of melting and casting aluminum alloys at all enterprises. Apply mesh, granular and porous ceramic filters. Strainers are made of fiberglass or metal mesh with mesh sizes from 0.5 ×...