Ceramic Foam Filters Adtech

Alumina Ceramic Foam Filter Manufacturers

Ceramic Foam Filters Adtech

Ceramic Foam Filters Adtech

Ceramic Foam Filter from AdTech Metallurgical Materials Co., Ltd has been focusing on research, development, production and marketing of the adhesive ceramic foam filter(CFF) for aluminum alloy casting Since 2012.

Advantages for Ceramic Foam Filters Adtech

Adopt adsorption principle for filter, can effectively remove big piece inclusions in molten aluminum, and effectively adsorb tiny inclusions.
No broken bits drop out, effectively reduce the pollution of molten aluminum.
Superior thermal shock resistance, improve erosion resistance ability of molten metal.
Automatic flow production,3 calibration procedures,precision size,fit the filter bowl tightly.
Improve the surface appearance and performance, purify molten aluminum.

Assembles for Ceramic Foam Filters Adtech:

  • Ceramic Foam Filter
  • Ceramic Fiber Sealing Gasket
  • Filter Bowl

Alumina Ceramic Foam Filter

Application for Ceramic Foam Filters Adtech

AdTech’s ceramic foam filter is produced basing on carrier with solid reticular structure and combined organic foam pores. The producing procedure is as below, put carrier into the thixotropic alumina slurry, adopt square to center correcting automatic extrusion process, so that slurry evenly deposits in foam skeleton of carrier, after drying solidification, then carrier will turn into final product by roasting formed under 1180 ℃ high temperature. Filter is installed in the filter bowl for filtrating impurity in molten aluminum alloy, which helps to meet the requirement of production in high value-added, high-tech performance aluminum alloy precision casting, such as computer hard drive, PS baseboard for printing, canning materials, fan blades for turbojet engine, etc.

Silicon Carbide Ceramic Foam Filter
Advantages for Ceramic Foam Filters Adtech

  • Adopt adsorption principle for filter, can effectively remove big piece inclusions in molten aluminum, and effectively adsorb tiny inclusions.
  • No broken bits drop out, effectively reduce the pollution of molten aluminum.
  • Superior thermal shock resistance, improve erosion resistance ability of molten metal.
  • Automatic flow production,3 calibration procedures,precision size,fit the filter bowl tightly.
  • Improve the surface appearance and performance, purify molten aluminum.

Sealing gasket for Ceramic Foam Filters Adtech

Ceramic filter is surrounded by Sealing gasket, laying between filter and filter bowl, to prevent molten aluminum leaking through interface. AdTech’s filter adopts sealing gasket in 3 different types, fiber paper material, fiber cotton material, expanding cotton material.

Photos for 3 different material Sealing gasket

Standard sizes for Ceramic Foam Filters Adtech

Dimension (± 3 mm
): 7x7in  9x9in  12x12in  15x15in  17x17in  20x20in  23x23in  26x26in
Thickness: 50 ± 2 mm
Bevel Angle: 17.5± 1.5°
Special Dimension: square, rectangular, round, trapezoidal, abnormal, or customized as per the requirement.

Technical Parameters:

Item Density
(g/cm³)
Rupture Modulus
(816℃ /Mpa)
Comprehensive Strength
(Mpa)
Operating Temperature
(℃)
Sealing gasket expanding temperature
(℃)
Index 0.45 5.5 0.8-1.0 1350 450-550

Pore size for Ceramic Foam Filter:

Pores amount in any 25.4mm length filter

Mesh NumberPPI 10 20 30 40 50 60
Pore Density(PCS) 8-12 18-22 28-32 38-42 48-52 58-62
No Comments

Post A Comment