News

Ceramic Filter Foundry for Casting is mainly used to filter aluminum and aluminum alloys in foundries and foundries. The filter mechanism of ceramic foam filters used for casting is usually described as diffusion interception and inertial collision interception or screening, sedimentation and deep Bed filtration. Because...

Castertips are brushed with boron nitride on the surface and are used for aluminum sheet casting. Castertips for aluminum alloy casting and rolling mill, including fixtures and nozzle parts. The casting nozzle parts are set inside the fixture. There are two sets of casting nozzle parts...

Feeding Tip is a key component of Aluminum sheet Casting. Its quality directly affects the quality of the strip and the yield of production. The aluminum silicate casting nozzle material can be divided into various types according to the performance and needs of different casting...

Ceramic Foam Filter Production is mainly used in the purification process of aluminum and aluminum alloy production. With the increasing requirements for the quality of aluminum products, the application of ceramic filter plates will become more and more extensive. The ceramic filter plate of our company employs...

Filter for Molten Aluminum is a particularly effective and long-life molten aluminum filter for filtering oxide and non-oxide impurities. The solid non-metallic particles suspended in the molten metal can cause serious difficulties in the aluminum casting and manufacturing process. These particles are mainly composed of oxides, which...

Ceramic Filter Factory produces ceramic foam filter, which are used to filter solid impurities contained in molten aluminum. The removal of entrained solids from the liquid is accomplished by passing the solid-laden aluminum liquid through a porous filter medium that does not pass through the...

Feeder Caster Tip During the aluminum strip casting process, molten aluminum is fed from the elongated casting tip (or "discharge nozzle") into the nip between two counter-rotating water-cooled rolls. The molten aluminum is cooled when it comes into contact with the rolls and cools as it...

Foundry Ceramic Filters Factory suggested by Egypt aluminium, who has an in-depth understanding of the production process and craftsmanship of Foundry Ceramic Filters. Foundry Ceramic Filters uses a three-dimensional network structure and an organic foam with connected pores as a carrier to invade the thixotropic alumina...

Aluminum Castertips are located in front of the rolls in the aluminum alloy domain rolling equipment to guide the aluminum alloy. The liquid molten aluminum enters the casting nozzle from the feed port at the rear end, and then is sent out from the discharge port...

Nozzle Cavity is a key part of conveying molten aluminum in aluminum alloy casting and rolling production. The nozzle structure will directly affect whether the melt can enter the casting-rolling zone from the nozzle cavity uniformly and stably, thereby affecting the quality of the plate. The...