21 11月 Aluminum Silicate Launder For Conveying Aluminum
Aluminum Silicate Launder For Conveying Aluminum
Aluminum Silicate Launder For Conveying Aluminum with purification function comprises a flow trough base, a flow channel measuring wall integrated with the trough base and a flow trough arranged above the trough base.
Aluminum Silicate Launder For Conveying Aluminum is provided with at least two card slots, and each card slot and the chute are arranged perpendicular to each other, and a filter plate is installed in the card slot.
In use, the filter plate is easy to replace, and the effect of purifying the aluminum liquid is remarkable. The filter plate is installed in the card slot on the base of the flow cell and the side wall, filtering impurities, purifying the aluminum liquid, and further improving the purity of the aluminum liquid. Casting high, fine and sharp aluminum products quality requirements, at the same time safe and reliable, easy to replace.
Aluminum Silicate Launder For Conveying Aluminum is one of the basic settings for the aluminum alloy foundry industry to get rid of the old type of Launder. The main function of the Aluminum Silicate Launder For Conveying Aluminum is to divert the aluminum liquid from the mixing furnace to the casting machine.
The working area was originally built using a flow cell for traditional high-temperature resistant castables. The surface of the flow cell is easy to stick aluminum during use, and the operator has a long working time when cleaning the flow cell, and the casting material is easily damaged. Therefore, the high-temperature aluminum liquid penetrates into the castable material, causing the shell steel plate to gradually deform, and the flow tank cannot be used normally in 4 months.
In addition, each pair of launders is maintained once, the castables need to be removed, and the shell steel plates are calibrated and rebuilt, and the maintenance process is labor-intensive.
www.adtechamm.com – firstname.lastname@example.org
After referring to the use of the trough in the same industry, Adtech successively rebuilt the old trough in 2014.
Aluminum Silicate Launder For Conveying Aluminum has high overall strength and large unit density. The surface of the trough is coated with high temperature refractory coating. Sticking aluminum, internal slag is easy to clean, no damage or cracking occurs under high temperature conditions for a long time, no leakage of aluminum at the flow channel interface and bottom, eliminating the safety hazard of aluminum leakage in the flow cell, reducing the time of shutdown and cleaning the flow tank by 30 minutes The above not only reduces the labor intensity of the general aluminum work, but also saves maintenance costs of more than 1 million yuan compared with the traditional use of the trough for two years.