Aluminium Launder For Metal Transfer Aluminium Launder For Metal Transfer is suitable for aluminum melting furnace, purifying furnace, casting table, the transportation of molten aluminium between furnace degassing and filtration. The most technically advanced way to deliver molten aluminum from melting furnaces to holders and die casting...
Molten Aluminium Degassing Machine Molten Aluminium Degassing Machine is based on the principle that dissolved hydrogen gas will move from an area of high concentration (in the melt) to an area of low concentration (in the inert gas). Hydrogen gas disperses in molten metal as it would...
Aluminium Degassing Rotor Deaerator Aluminium Degassing Rotor Deaerator is designed for on-line degassing of aluminum fluids with high flow rates, high gas content and high inclusions. It has two independently controllable steering rotors with opposite rotations to provide more powerful agitation. Gas capacity, the equipment is...
AdTech Aluminium Launder AdTech Aluminium Launder is also called silicate fiber trough, which is mainly used for the distribution and transmission of aluminum liquid with high heat preservation requirements, such as the active flow trough on casting and rolling, and the distribution trough on the same...
Aluminum Degassing Machine Aluminum Degassing Machine graphic rotor that driven by motor come down to liquid aluminum and rotate into it, at the same time, high purity nitrogen (or Argon) and refining agent will be introduced into it, then can get degassing, deslagging and refining function....
Aluminium recycling process Why Aluminium should be Recycled: Aluminium is 100% recyclable and experiences no loss of properties or quality during the recycling process. Recycling aluminium also uses only 5% of the energy used to create new Aluminium and emits only 5% of the greenhouse gases....
Launders For Aluminum Melting Furnace Our refractory technologies may allow producers to eliminate Launders For Aluminum Melting Furnace, avoid the need to "super-heat” the metal in in-line equipment and, most importantly, reduce holding furnace temperatures . Rex Materials' Fusion SL precast refractory launders are extremely abrasion...
Die-cast aluminum alloy Al-Si alloy The Al-Si alloy has the characteristics of small crystallization temperature interval, large solidification latent heat of the silicon phase in the alloy, large specific heat capacity, and small linear shrinkage coefficient. Therefore, its casting performance is generally better than other aluminum alloys, its...
Control of Molten Metal Flow The ways to gain better quality and higher casting performance is an urgent topic among aluminium producers today. This issue is also often on the agenda at conferences like this and the subjects and technologies to achieve this varies. Controlling the molten metal...
Molten Aluminium Flow Box 1. Molten Aluminium Flow Box comprising: an upper rectangular-shaped section; a lower inverted pyramidal-shaped section; a unitary dual nozzle assembly located in a bottom region of the lower inverted pyramidal-shaped section. 2. Molten Aluminium Flow Box comprising: an upper rectangular-shaped section; a lower inverted pyramidal-shaped section housing a...