Aluminium Silicate Plug Cone has a tough texture and strong wind erosion resistance; no gap lining; low heat storage and low heat loss; It is in direct contact with flame for hot surface; excellent construction, installation performance, excellent thermal shock resistance, high compressive strength, long service...
Aluminum Silicate Stopper Cone is made from high quality ceramic fiber cotton and is made by vacuum forming. The purpose of developing this product is to produce a rigid and self-supporting product with superior high temperature performance. Aluminum Silicate Cone is a product that meets the...
Tap Hole Cones are made of high-purity ceramic fiber by adding inorganic and a small amount of organic binder in different proportions, and is formed by dehydration by vacuum equipment. Then dry processing, and then precision mechanical finishing, the product can have good mechanical strength, precision...
Ceramic Fiber Cone Plug has a low shrinkage over its temperature range Maintain high insulation, light weight and impact resistance. Unburned materials are easily cut or machined. The product is resistant to abrasion and spalling during use and is not wetted by most molten metals. Ceramic Fiber Cone Plug...
Alumina Silicate Fibre Cone Parameter Density plugging class 0.30-0.35g/cm3 Thermal performance heat resistance temperature 1100 ° C Maximum operating temperature 1000 ° C Continuous use temperature 800 ° C Thermal conductivity is 0.77w/m.k at 720°C Permanent linear shrinkage less than 0.6% after 24 hours at 760 °C Dimensional size sleeve type length...
Aluminum Silicate Fiber Cone is a ceramic fiber thermal insulation cap product that is oriented to meet the fire resistance and heat insulation of certain special parts of thermal equipment. The product is non-brittle material, high strength, accurate size, can be made according to customer needs...
Aluminium Silicate Cone Foundry is available in a variety of sizes and shapes, including tubular, tapered, dome and square boxes. Aluminium Silicate Cone Foundryv can be produced according to customer's requirements, but some products can also be used for inventory, such as casting caps and casings...
Aluminium Silicate Stopper Cone is made from high quality ceramic fiber cotton and is made by vacuum forming. The purpose of developing this product is to produce superior temperature Performance is rigid and has a self-supporting strength profiled product. Aluminium Silicate Stopper Cone is a product that...
Most aluminum smelting furnaces or holding furnaces in the aluminum foundry industry have aluminum nozzles that are sealed with Aluminosilicate Cone. Aluminosilicate Cone also refers to the water heater mouth insulation plug, insulation plug, insulation plug, insulation cap, insulation plug. I chose Ivans to use 1,260 °...
Tapping Hat Cone is a ceramic fiber shaped product that is produced in order to meet the fire resistance and heat insulation of special parts of thermal equipment. The product is non-brittle material with high strength and accurate size. It can be made into various forms...