Placa filtrante de cerámica celular

5 de diciembre Placa filtrante de cerámica celular

Posted at 09:36h in Noticias by AdTech 0 Comments

0 Likes

Placa filtrante de cerámica celular

La placa filtrante de cerámica celular fabricada por nuestra empresa es capaz de eliminar eficazmente todo tipo de impurezas del aluminio fundido, y la junta de fibra cerámica de sellado está fijada alrededor de la placa filtrante, lo que ayuda a sellar la placa en la caja del filtro y garantiza que no se escape aluminio fundido por los laterales.

Here we introduce the use of Foam ceramic filter plate:
1. Inspect and clean debris on the surface of the filter box to keep the filter box clean and free from damage;
2. Put the filter plate into the filter box gently and press the sealing gasket around the filter plate to prevent the aluminum liquid from flowing or floating.
3. Evenly preheat the filter box and filter plate so that they are close to the temperature of the aluminum liquid. The preheating temperature of the filter plate is not lower than 460°C. The expanded cotton is automatically sealed by the thermal expansion. The filter plate is not easy to float and is preheated to remove the adsorbed water. Parts, more conducive to help open the initial filter aperture opening, to prevent the thermal expansion and contraction to bring some plug to the filter plate. Preheating can be electric or gas heating, normal heating 15-30 minutes;
4. Pay attention to observe the change of the aluminum hydraulic head when casting, and maintain the flow of normal demand aluminum liquid. The normal initial pressure head is 100-150mm. When the aluminum liquid starts to pass,
El penetrador descenderá por debajo de los 75-100 mm y, a continuación, subirá lentamente;
5. During the normal filtration process, avoid knocking and vibrating the filter plate. At the same time, the flow tank should be filled with aluminum water to avoid the perturbation of the aluminum liquid;
6. Una vez finalizada la filtración, retira la placa filtrante a la mayor brevedad posible y limpia la caja del filtro.