High Quality Foam Filter | Rusal,Alcan ,Rio,Dubai Aluminium

12 de agosto Filtro de espuma de alta calidad

Posted at 09:43h in Noticias by AdTech 0 Comments

0 Likes

Filtro de espuma de alta calidad

High Quality Foam Filter produced by Adtech China can effectively remove all kinds of impurities in the aluminum liquid, and the sealing ceramic fiber gasket is affixed around the filter plate, which helps to seal the filter plate in the filter box and ensure that there is no aluminum liquid from Side out.

High Quality Foam Filter product advantages
1. Aprovechando el principio de adsorción, es capaz de eliminar eficazmente las inclusiones de gran tamaño presentes en el aluminio fundido y de adsorber eficazmente las inclusiones finas de pequeño tamaño;
2. No arrojar escoria, lo que reduce de forma efectiva la contaminación del aluminio fundido;
3. Buena resistencia al choque térmico y mayor resistencia a la corrosión por metal fundido;
4. Producción en cadena de montaje automatizada, tres procedimientos de calibración, dimensiones precisas y mayor compatibilidad con la caja del filtro;
5. Mejorar la calidad de la superficie, el rendimiento del producto y la microestructura.

High Quality Foam Filter Instructions
1. Revisa y limpia los residuos de la superficie de la caja del filtro para mantenerla limpia y sin daños.
2. Gently place the Filtro cuadrado de espuma cerámica in the filter box and press the seal gasket around the filter plate with your hand to prevent the aluminum liquid from flowing or floating. Preheat the filter box and the filter plate evenly so that it is close to the temperature of the aluminum liquid. The preheating temperature of the filter plate is not lower than 260°C. Preheating to remove adsorbed water helps to facilitate the opening of the initial filter pore size at the moment and prevents the heat from rising and shrinking to block some holes in the filter plate. Preheating can be electric or gas heating, normal heating 15-30 minutes.
4. Presta atención a la evolución de la altura de presión hidráulica del aluminio durante la colada y mantén un caudal de aluminio fundido acorde con la demanda normal. La altura de presión inicial normal es de 100-150 mm. Cuando el aluminio fundido comience a pasar, la altura de presión descenderá por debajo de 75-100 mm y, a continuación, volverá a aumentar lentamente.
5. Durante el proceso normal de filtración, evítese golpear o hacer vibrar la placa filtrante. Al mismo tiempo, el depósito de flujo debe llenarse con agua de aluminio para evitar que las oscilaciones del líquido de aluminio sean demasiado grandes o demasiado pequeñas.
6. Una vez finalizada la filtración, retira la placa filtrante a la mayor brevedad posible y limpia la caja del filtro.

Here we introduce the use of High Quality Foam Filter
1. Inspect and clean debris on the surface of the filter box to keep the filter box clean and free from damage;
2. Put the filter plate into the filter box gently and press the sealing gasket around the filter plate to prevent the aluminum liquid from flowing or floating.
3. Evenly preheat the filter box and filter plate so that they are close to the temperature of the aluminum liquid. The preheating temperature of the filter plate is not lower than 460°C. The expanded cotton is automatically sealed by the thermal expansion. The filter plate is not easy to float and is preheated to remove the adsorbed water. Parts, more conducive to help open the initial filter aperture opening, to prevent the thermal expansion and contraction to bring some plug to the filter plate. Preheating can be electric or gas heating, normal heating 15-30 minutes;
4. Pay attention to observe the change of the aluminum hydraulic head when casting, and maintain the flow of normal demand aluminum liquid. The normal initial pressure head is 100-150mm. When the aluminum liquid starts to pass,
El penetrador descenderá por debajo de los 75-100 mm y, a continuación, subirá lentamente;
5. During the normal filtration process, avoid knocking and vibrating the filter plate. At the same time, the flow tank should be filled with aluminum water to avoid the perturbation of the aluminum liquid;
6. Una vez finalizada la filtración, retira la placa filtrante a la mayor brevedad posible y limpia la caja del filtro.