Foam Filter Manufacturers, Ceramic Foam Filter,Foam Casting Aluminum

20 Şubat Köpük Filtre Üreticileri

Posted at 03:47h in Haberler by AdTech 0 Comments

0 Likes

Köpük Filtre Üreticileri

Foam Filter Manufacturers ADTECH keeps focusing on the manufacture of the metallurgical material.

ADTECH, metalurjik malzeme üretimine odaklanmaya devam eden ve International Enterprise tarafından takip edilen öncülerden biridir.
1. Seramik Köpük Filtre
2. Gaz Giderme Ünitesi
3. Filtre Kutusu
4. Sıcak üst döküm serisi
5. Rulo döküm nozulu
6. Flux serisi
7. Diğer Metalurjik Malzemeler

Foam Filter Manufacturers AdTech ceramic foam filter plate is produced basing on carrier with solid reticular structure and combined organic foam pores.
The producing procedure is as below, put carrier into the thixotropic alumina slurry, adopt square to center correcting automatic extrusion process, so that slurry evenly deposits in foam skeleton of carrier, after drying solidification.
Then carrier will turn into final product by roasting formed under 1180 ℃ high temperature.
Filter is installed in the filter bowl for filtrating impurity in molten aluminum alloy, which helps to meet the requirement of production in high value-added, high-tech performance aluminum alloy precision casting, such as computer hard drive, PS baseboard for printing, canning materials, fan blades for turbojet engine, etc.

Advantages for Foam Filter Manufacturers AdTech

Adopt adsorption principle for Seramik Köpük Filtre, can effectively remove big piece inclusions in molten aluminum, and effectively adsorb tiny inclusions.
Kırık parçalar dökülmez, bu sayede erimiş alüminyumdan kaynaklanan kirliliği etkili bir şekilde azaltır.
Üstün termal şok direnci, erimiş metalin aşınma direncini artırır.
Otomatik akışlı üretim, 3 kalibrasyon prosedürü, hassas boyut, filtre haznesine sıkıca oturur.
Yüzey görünümünü ve performansını iyileştirmek, erimiş alüminyumu arıtmak.