Filtro de espuma cerámica «Lucky Aluminium Karachi»

Filtro de espuma cerámica «Lucky Aluminium Karachi»

Filtro de espuma cerámica «Lucky Aluminium Karachi»

When Lucky Aluminium Karachi Ceramic Foam Filter filters liquid aluminum, the liquid aluminum flows through the tortuous holes of the ceramic filter plate, and the non-metallic impurities and oxide film (commonly known as slag) in the liquid aluminum are affected by the axial pressure, friction, and surface adsorption of the aluminum liquid. The combined action of force, etc., is retained on the inner surface of the hole of the ceramic filter plate and the crevice cavity, thereby separating the slag and the molten aluminum.

Tras un periodo de filtrado, la escoria que queda en la placa filtrante cerámica también participa en la adsorción de la escoria, lo que le permite desempeñar una función de filtrado.
Dado que el comportamiento de la escoria adsorbida en la placa filtrante cerámica es exactamente el mismo que el de la escoria que se va a adsorber en el aluminio fundido, su relación de superficie es mucho mayor que la de la placa filtrante cerámica, y su actividad superficial es mucho mayor que la de la placa filtrante cerámica, por lo que la capacidad para adsorber y retener la escoria en el aluminio fundido es mucho mayor que la de la placa filtrante cerámica.

Filtro de espuma cerámica «Lucky Aluminium Karachi»
Por este motivo, la placa filtrante de cerámica es capaz de retener las escorias finas, cuyo tamaño es muchas veces inferior al de sus propios orificios.
En el proceso de filtrado, la escoria adsorbida en la placa filtrante cerámica va acumulándose gradualmente tras adsorber e interceptar la escoria presente en el aluminio fundido.
Bajo la agitación y el roce del flujo de líquido, la escoria, que tiene una resistencia extremadamente baja, puede romperse o desprenderse de la placa filtrante cerámica.
Durante el proceso de caída de la escoria, si la placa filtrante cerámica es más gruesa o tiene orificios pequeños, esta puede quedar retenida o volver a ser adsorbida.

Proveedores de filtros de espuma cerámica AdTech Metallurgical Materials Co., Ltd.

Inicio


Email:sales@adtechamm.com

When Lucky Aluminium Karachi uses the new Ceramic Foam Filter, slightly larger inclusion particles in the aluminum melt may pass through the pores of the filter plate. These “large particles” inclusions are inherited in the cast-rolled billet and affect its internal quality.

When the filter plate is used for a period of time, some small impurity particles will be adsorbed at its pores. As the amount of filtration of the aluminum liquid does not gradually increase, the adsorbed particles in the pores of the filter plate continue to accumulate, so that the pores of the filter plate become smaller and the filtering effect is improved. .
But when the amount of impurities adsorbed by the filter plate is so large that it blocks the pores of the filter plate, the filtering effect begins to decrease, and the quality of the cast-rolled billet is correspondingly reduced.
It can be seen from the test pinholes that the two-stage filter plate can well remove the small particle inclusions in the aluminum melt, and has a better purification effect on the aluminum melt.

Lucky Aluminium Karachi Ceramic Foam Filter, Ceramic Foam Filter, Ceramic Filter For Foundry, Alumina Ceramic Foam Filter are used in many country aluminium melting workshop, such as Philippines,Cambodia,Laos,Malaysia,Myanmar,Thailand,Brunei,Vietnam,Singapore,Indonesia ,Pakistan,Bhutan,Maldives,Bangladesh,Nepal,SriLanka,India,Kazakhstan,Kyrgyzstan,Tajikistan,Uzbekistan,Turkmenistan,Kazakhstan,Kyrgyzstan,Tajikistan,Uzbekistan,Turkmenistan

No Comments

Post A Comment