Alümina Seramik Köpük Filtreyi Kullanın

Alümina Seramik Köpük Filtreyi Kullanın

Alümina Seramik Köpük Filtreyi Kullanın

Use Alumina Ceramic Foam Filter by aluminium casting line can effectively remove all kinds of impurities in the aluminum liquid.
The sealing ceramic fiber gasket is affixed around the filter plate, which helps to seal the filter plate in the filter box and ensure that there is no aluminum liquid from Side out.

Here we introduce how to Use Alumina Ceramic Foam Filter
1. Filtre kutusunun temiz ve hasarsız kalmasını sağlamak için filtre kutusunun yüzeyindeki kalıntıları kontrol edin ve temizleyin;

2. Use Alumina Ceramic Foam Filter into the filter box gently and press the sealing gasket around the filter plate to prevent the aluminum liquid from flowing or floating.

3. Evenly preheat the filter box and Alumina Ceramic Foam Filter so that they are close to the temperature of the aluminum liquid.
The preheating temperature of the filter plate is not lower than 460°C.
The expanded cotton is automatically sealed by the thermal expansion.
Alümina Seramik Köpük Filtre to remove the adsorbed aluminium water. Parts, more conducive to help open the initial filter aperture opening, to prevent the thermal expansion and contraction to bring some plug to the filter plate.
Preheating can be electric or gas heating, normal heating 15-30 minutes.

4. Pay attention to observe the change of the aluminum hydraulic head when casting, and maintain the flow of normal demand aluminum liquid.
The normal initial pressure head is 100-150mm. When the aluminum liquid starts to pass,
The indenter will fall below 75-100mm, and then the indenter will slowly increase.

5. During the aluminium filtration process, avoid knocking and vibrating the filter plate.
At the same time, the flow tank should be filled with aluminum water to avoid the perturbation of the aluminum liquid.

6. Filtreleme işlemi tamamlandıktan sonra, filtre plakasını zamanında çıkarın ve filtre kutusunu temizleyin.

Alümina Seramik Köpük Filtreyi Kullanın

No Comments

Sorry, the comment form is closed at this time.