Casting Filter for Casting | Adtech China

23 Dic Filtro de fundición para fundición

Posted at 03:53h in Filtro de espuma cerámica by AdTech 0 Comments

0 Likes

Filtro de fundición para fundición is mainly used for filtering aluminum and aluminum alloys in foundries and foundries, and can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner.
Los metales más puros permiten obtener piezas de fundición de mayor calidad, reducir los desechos y disminuir los defectos por inclusiones, lo que contribuye a aumentar los beneficios.

Inclusions can form pores and generate thermal cracks during the solidification process, causing surface defects to damage the appearance and often reduce mechanical properties.
In many cases, filtering reduces these causes of waste to almost zero. It is common to increase the output to nearly 100% and reduce the scrap rate to 0% or close to 0%.

Casting Filter for Casting has all common sizes
7″, 9″, 12″, 15″, 17″, 20″ and 23″.
We provide all porosities from PPI 10 to PPI 60 (PPI = number of holes per inch). You can also customize the size of the Filtro de reparto.

Gasket of Casting Filter for Casting
The edge of CFF-AL is equipped with gaskets. The gasket ensures the correct and tight position of the filter in the Filtering Housing. There are different types of gaskets, for example. Ceramic fiber gaskets, etc. You can also choose CFF without gaskets.

Casting Filter function for aluminum castings.
Purificar el metal fundido líquido
Simplificar el sistema de control de compuertas
Mejorar la estructura metalúrgica de las piezas fundidas
Reducir la presencia de escoria en las piezas fundidas
Mejorar la tasa de calificación de las piezas fundidas
Reducir los defectos de reoxidación interna en las piezas de fundición
Reducir los defectos superficiales tras la fundición

Filtro de reparto is basically divided into 6 pore sizes: 10PPI, 15PPI, 20PPI, 25PPI, 30PPI, and 40PPI. The larger the number, the smaller the aperture. But in actual practice, the four types of 10PPI 20PPI 30PP 40PPI can meet the needs of customers.

Selección de la apertura
1. El moldeado: 10～25 ppi
2. Colada semicontinua: 30～60 ppi
3. Aluminio o chapa de alta calidad: 50～60 ppp
4. Colada continua y laminación: 50～60 p

How to choose Casting Filter?
1. Aluminum alloy bar selection: 10-30ppi
2. Long-term casting options: 30-50ppi
3. High-quality aluminum profile or plate selection: 40 or 50ppi
4. Double zero wave continuous casting and rolling options:> 50ppi
5. Other specifications can be customized according to your requirements