مرشح رغوي خزفي للصب

28 أغسطس مرشح رغوي خزفي للصب

Ceramic Foam Filter For Cast is abbreviated as CFF, which is manufactured based on a solid network structure and a carrier with organic foam cells.
The preparation process is that the carrier is put into the thixotropic alumina slurry, and the angular center positive automatic extrusion process is adopted to uniformly deposit the slurry on the carrier foam skeleton after solidification.
After that, the carrier is made into a final product by firing at a high temperature of 1180°C.
The bowl is equipped with an open-cell foam filter material used to filter impurities in molten aluminum alloy, which helps to meet the production requirements of aluminum alloy precision castings with high added value and high technical performance (such as computer hard disks, PS boards). Used for printing, canning materials, fan blades of turbojet engines, etc.

Advantages of Ceramic Foam Filter For Cast
The filter adopts the adsorption principle, which can effectively remove the large inclusions in the molten aluminum and effectively adsorb the fine inclusions.
There is no debris, effectively reducing the pollution of molten aluminum. مرشح رغوي خزفي للصب – sales@adtechamm.com
مقاومة ممتازة للصدمات الحرارية، مما يعزز مقاومة التآكل لدى المعدن المنصهر.
Automatic production, 3 calibration procedures, accurate dimensions, and close installation of the bowl.
تحسين مظهر وأداء السطح وتنقية الألومنيوم المنصهر.

The ceramic foam filter has a mesh structure with a certain strength and can withstand the pressure difference of the metal liquid surface and the impact of the metal flow, but the material structure is precise and fragile. Good quality, large surface area and good filtering effect.

ألكان للألمنيوم uses Adtech Ceramic Foam Filter For Casting in the production process of 6063 aluminum alloy, and makes the following summary.
For manufacturers of aluminum alloy profiles, using ceramic foam filters to purify molten aluminum has several advantages
1. تحسين كفاءة عملية البثق
The 6063 alloy extrusion billet is refined with the filter plate, and the specific die is tracked. The extrusion speed is increased by about 20% and the production efficiency is increased by about 15%.
2. إطالة عمر القالب وتقليل الوقت المستغرق في صيانته.
3. تقليل التوتر
The 6063 alloy melt was refined with a filter plate, and it was found that the extrusion force was more than 3% lower than that without filtering.
4. تحسين جودة سطح مقاطع الألمنيوم بشكل كبير.
from above. The use of ceramic foam filters to refine aluminum melt has great advantages in reducing production costs and improving product quality.

مقالات ذات صلة:

ترشيح الألومنيوم المنصهر موردو مرشحات الرغوة الخزفية بيع مرشح رغوي خزفي مرشح خزفي للمسابك روس ألومنيوم في عام 2018، حظيت شركة «أدتيك» الألمانية المتخصصة في مجال الألمنيوم باهتمام كبير مصنع مرشحات الزركونيا مصنعو مرشحات الشموع الخزفية مقدمة عن لوحة الترشيح الخزفية PAL مصنع مرشحات Cff مقدمة عن مرشح الرغوة الخزفي المصنوع من الألومينا استخدام ألواح الترشيح الخزفية رغوة مرشح خزفية مقدمة عن مرشح الرغوة الخزفي المصنوع من الألومينا