مرشح رغوي خزفي من الألومنيوم

3 يونيو مرشح رغوي خزفي من الألومنيوم

Ceramic Foam Filter Aluminium is used to filter aluminum slag into aluminum melt to improve the purity of the melt.
1. It can effectively eliminate large inclusions in the aluminum liquid.
2. It can remove the fine inclusions of a few microns in size in the aluminum melt that conventional processes cannot do. At the same time, due to the filtering of small inclusions, the number of effective crystal nuclei in the aluminum liquid is reduced, so that the aluminum liquid grows nuclei under large supercooling conditions, the solidification time is shortened, and the structure is refined.
3. Reduce the hydrogen content in the aluminum liquid. Hydrogen atoms can be adsorbed on some oxidized inclusions, and the oxidized inclusions can become the core of bubble growth, so the inclusions are filtered out and the gas on them is removed.
4. The content of harmful elements (Na K) in the aluminum liquid can be removed by adsorption

Note: Ceramic Foam Filter Aluminium is a one-time consumable when used in the aluminum processing industry. Users are requested to carefully consider their furnace capacity and select the corresponding specifications of ceramic filter plates to avoid improper use or unnecessary waste.

In general, the selection of the filter plate should take into account factors such as the quality of the finished product, the flow rate of the aluminum liquid in the launder, the total amount of aluminum liquid filtered, and the cleanliness of the aluminum liquid itself.

How to use Ceramic Foam Filter Aluminium
1. قم بتنظيف صندوق الفلتر
2. Gently put the filter plate into the filter box and press the sealing gasket around the filter plate by hand to prevent the aluminum liquid from bypassing.
3. Preheat the filter box and filter plate evenly to bring it close to the temperature of the molten aluminum.
4. Observe the changes of the aluminum hydraulic head during casting. The normal starting head is 75-150mm. When the molten aluminum begins to pass, the indenter will fall below 25mm. Then the indenter will gradually increase.
5. بعد عملية الترشيح، قم بإزالة لوحة المرشح في الوقت المناسب وتنظيف صندوق المرشح.

مقالات ذات صلة:

مورد مرشحات الرغوة الخزفية من الألومنيوم «سيبيريا» مرشحات سيراميك الألومينا المصممة حسب الطلب مرشح رغوي خزفي بنية قرص العسل رغوة الترشيح «ألونيما» مرشح الألومينا مرشح الرغوة الخزفي من نورديك مرشح الرغوة الخزفي من شركة «روسال» مرشح الرغوة الخزفي - الدنمارك مرشح رغوي خزفي من الألومنيوم - البرازيل مرشح رغوي خزفي من نوع «فاوندري» للألمنيوم استخدام مرشح رغوي من السيراميك الألومينيوم مرشح رغوي خزفي من الألومنيوم، بيرو مرشح رغوي من السيراميك والألومينا - أستراليا مرشح الرغوة الخزفي في فيتنام