Mısır Seramik Filtre Alüminyum Eritme Tesisi

22 Kasım Mısır Seramik Filtre Alüminyum Eritme Tesisi

Posted at 05:22h in Seramik Köpük Filtre by AdTech 0 Comments

0 Likes

Ceramic Filter Egypt Aluminium Smelter is used in the purification process of aluminum ingot and aluminum rod casting process, which can improve product quality and reduce costs. Ceramic plate filters are widely used in North Africa. In order to achieve the best filtering technology, the reasonable configuration of the filter is very important.

Seramik köpük filtre boyutları
660x660x50 (26 inç)
584x584x50 (23 inç)
508x508x50 (20 inç)
432x432x50 (17 inç)
381x381x50 (15 inç)
305x305x50 (12 inç)
228x228x50 (9 inç)
178x178x50 (7 inç)

Seramik köpük filtre Gözenek Boyutu (PPI): 10/20/30/40/50/60

30 ppi ve 40 ppi Foundry Filtresi, alüminyum döküm endüstrisinde en yaygın olarak kullanılan seramik köpük filtredir.
Sıradan alüminyum dökümde genellikle 10-40 ppi seramik filtre plakaları kullanılır.
Havacılık sektöründe ve yüksek kaliteli alüminyum malzemelerde genellikle 30-60 ppi seramik filtre plakaları kullanılır.

In order to produce high-quality aluminum products, the recommended process configuration for deep filtration: vacuum device + deep bed filtration device + Çin Seramik Köpük Filtre.

Ceramic Filter Egypt Aluminium Smelter is used before casting to avoid the loss of media due to deep filtration, causing a large amount of impurities to accompany molten aluminum casting, resulting in a lot of waste.
Ayrıca, üretim ve üretim programına göre, uygun derin taban ön ısıtma yöntemini (çevrimiçi veya çevrimdışı) göz önünde bulundurun.

Boru tipi filtrelerin kullanımıyla ilgili proses konfigürasyonu önerileri: gaz gaz giderme cihazı + boru tipi filtreler (en az iki adet paralel bağlanmış), Japonya’daki alüminyum işleme işletmelerinin çoğu bu düzeni benimsemektedir.
In order to achieve energy saving and emission reduction and form an “aluminum electrolysis” industrial chain, some enterprises use aluminum electrolysis as raw materials for alloy production.
Elektrolitik alüminyumun karmaşık safsızlık bileşimi ve daha fazla metalik olmayan cüruf oluşumu nedeniyle, boru şeklindeki filtrenin önüne bir seramik filtre cihazı takılması tavsiye edilir.

Metal defects cause aluminum processing deformation and damage to the mechanical properties of the final product cannot be ignored. Therefore, it is necessary to pay attention to the purification treatment of the aluminum melt. Before the filter is used, the gas and slag content is too high, which will cause the foam ceramic filter to block. Therefore, adding a vacuum device before filtering can make the aluminum liquid purification process smoother.

On January 25, Egyptian State-owned Enterprise Minister Hisham Tawfik announced that the Egyptian government is preparing to implement the Egyptian Aluminum Company (Egyptalum) upgrade project. The feasibility study of the project is expected to be completed in mid-2021.
The project includes replacing old parts in two phases and adopting new energy-saving technologies to reduce power consumption, with a view to increasing the company’s production capacity to 250,000 tons/year.
In addition, six companies including China Aluminum, Italy Endeco, German Global Foundry Engineering (GFE), and Consulting Engineering Group (CEGMAS) have submitted technical tenders to develop and implement a feasibility study for a new automobile wheel production line.
Egyptian Aluminum Company is a listed state-owned aluminum company in Egypt and the largest aluminum manufacturer in Egypt, with a built-up capacity of 320,000 tons per year.