16 ديسمبر استخدم مرشح «هونيكومب» الخزفي
Use Honeycomb Ceramic Filter produced by Adtech can effectively remove all kinds of impurities in the aluminum liquid.
Use Honeycomb Ceramic Filter with sealing gasket around the filter plate, which helps to seal the filter plate to avoid aluminum liquid out.
Here we introduce the use of Honeycomb Ceramic Filter
1. Clean debris on the surface of the filter box to keep the filter box clear and free from damage.
2. Put the filter plate into the filter box gently and press the sealing gasket around the filter plate to prevent the aluminum liquid out.
3. Preheat the filter box and filter plate so that they are close to the temperature of the aluminum liquid. The preheating temperature of the filter plate is not lower than 460°C. The expanded cotton is automatically sealed by the thermal expansion. The filter plate is not easy to float and is preheated to remove the adsorbed water. Parts, more conducive to help open the initial filter aperture opening, to prevent the thermal expansion and contraction to bring some plug to the filter plate. Preheating can be electric or gas heating, normal heating 15-30 minutes;
4. يجب الانتباه إلى التغيرات التي تطرأ على ارتفاع الضغط الهيدروليكي للألمنيوم أثناء الصب، والحفاظ على تدفق سائل الألمنيوم بالكمية المطلوبة. ويبلغ ارتفاع الضغط الأولي الطبيعي 100-150 ملم. وعندما يبدأ سائل الألمنيوم في التدفق،,
سينخفض عمق الانغماس إلى ما دون 75-100 مم، ثم يبدأ في الزيادة تدريجيًّا؛;
5. أثناء عملية الترشيح العادية، تجنب ضرب لوحة المرشح أو تعريضها للاهتزاز. وفي الوقت نفسه، يجب ملء خزان التدفق بمحلول الألومنيوم لتجنب اضطراب سائل الألومنيوم؛;













Sorry, the comment form is closed at this time.