{"id":5283,"date":"2019-07-03T06:46:01","date_gmt":"2019-07-03T06:46:01","guid":{"rendered":"http:\/\/www.adtechamm.com\/?p=5283"},"modified":"2019-07-03T06:46:01","modified_gmt":"2019-07-03T06:46:01","slug":"ceramic-filters-company-from-adtech-china","status":"publish","type":"post","link":"https:\/\/www.adtechamm.com\/tr\/ceramic-filters-company-from-adtech-china\/","title":{"rendered":"Adtech China\u2019ya ait Seramik Filtreler \u015eirketi"},"content":{"rendered":"

Adtech China\u2019ya ait Seramik Filtreler \u015eirketi<\/strong><\/p>\n

Ceramic Filters Company ADTECH keeps focusing on the manufacture of the metallurgical material.<\/p>\n

ADTECH, metalurjik malzeme \u00fcretimine odaklanmaya devam eden ve International Enterprise taraf\u0131ndan takip edilen \u00f6nc\u00fclerden biridir.
\n1. Seramik K\u00f6p\u00fck Filtre
\n2. Gaz Giderme \u00dcnitesi
\n3. Filtre Kutusu
\n4. S\u0131cak \u00fcst d\u00f6k\u00fcm serisi
\n5. Rulo d\u00f6k\u00fcm nozulu
\n6. Flux serisi
\n7. Di\u011fer Metalurjik Malzemeler<\/p>\n

During the melting and casting of aluminum, bubbles, oxide films, and non-metallic inclusions disrupt the continuity of the metal structure, causing stress concentration, lowering the performance of the casting, and reducing the processing performance. In order to avoid these hazards, the aluminum melt must be purified in two main ways:<\/p>\n

1. Adsorpsiyonla ar\u0131tma
\nChlorine, nitrogen or other inert gases are introduced to the aluminum liquid filter tank. These gases and the aluminum liquid generate a bubble chlorine salt, which causes the impurities to float or sink to achieve the purpose of removing the gases and impurities in the aluminum liquid.<\/p>\n

2. Filtreleme yoluyla ar\u0131tma
\nThe aluminum liquid is allowed to flow into the aluminum liquid filter tank, and the aluminum foam is purified by capturing the inclusions through the ceramic foam filter plate.
\nIvans aluminum liquid filter box is aluminum industry special aluminum silicate filter box, usually we call foam ceramic filter box, filter box made of steel shell and aluminum silicate liner.
\nDuring filtration, the aluminum melt rakes the rent of the foam ceramic filter plate and flows along the zigzag channels and voids in the filter plate. Impurities in the aluminum melt contact with the surface of the filter plate channel under the action of deposition, inertia, and interception. Pressure, friction, surface adsorption and other effects, impurities are firmly left in the filter plate.<\/p>\n

\"Adtech<\/p>\n

K\u00f6p\u00fck seramik filtre plakalar\u0131<\/a> are installed and used. Ceramic Filters Company Adtech notes that<\/strong>, the following aspects need to be noted:
\n1. Use the filter plate correctly:
\nFiltre plakas\u0131n\u0131n boyutu ve delik say\u0131s\u0131, s\u00f6z konusu d\u00f6k\u00fcm t\u00fcr\u00fcn\u00fcn ak\u0131\u015f h\u0131z\u0131 aral\u0131\u011f\u0131, filtreleme s\u0131ras\u0131nda metalin maksimum s\u0131v\u0131 seviyesi, toplam filtreleme miktar\u0131 ve orijinal al\u00fcminyum s\u0131v\u0131s\u0131n\u0131n temizlik derecesi g\u00f6z \u00f6n\u00fcnde bulundurularak se\u00e7ilmelidir.
\n2. Pre-melt filtration treatment can not be ignored:
\nSuch as molten aluminum furnace and holding furnace normal slag, cleaning furnace; furnace refining. In particular, an in-line degassing device is still necessary because it not only reduces the hydrogen content of the melt, but also removes some of the non-metallic inclusions.
\n3. Filtre plakas\u0131, kare \u015fekilli ate\u015falt\u0131 blokla uyumlu olmal\u0131d\u0131r:
\nThe two are adapted to seal, so as to prevent the metal from flowing into the casting box from the gap without being filtered, and also avoid the failure of the foam filter plate to float in the aluminum water due to the excessive light weight.
\n4. Kullanmadan \u00f6nce \u00f6nceden \u0131s\u0131t\u0131n:
\nNemi gidermek ve ilk ge\u00e7ici filtrelemeyi kolayla\u015ft\u0131rmak i\u00e7in \u00f6n \u0131s\u0131tma yap\u0131n. \u00d6n \u0131s\u0131tma, elektrikli veya gazl\u0131 \u0131s\u0131tma sistemi kullan\u0131larak ger\u00e7ekle\u015ftirilebilir. Normal ko\u015fullarda bu i\u015flem yakla\u015f\u0131k 15 dakika s\u00fcrer.
\n5. During normal filtration, no slag is required to avoid knocking and vibrating the filter plate. At the same time, the launder should be filled with aluminum water to avoid too much worries of aluminum water.
\n6. D\u00f6k\u00fcm i\u015fleminden sonra, ak\u0131\u015f h\u00fccresindeki ve filtre plakas\u0131 \u00fczerindeki metali bo\u015falt\u0131n. Yurtd\u0131\u015f\u0131nda, filtre plakas\u0131n\u0131n \u00fczerine yerle\u015ftirilen ve bir dakika boyunca sallanarak filtre plakas\u0131ndan kalan yakla\u015f\u0131k 75% s\u0131v\u0131 metali atmak i\u00e7in kullan\u0131lan bir titre\u015fimli cihaz bulunmaktad\u0131r.
\n7. Finally clean the perimeter and remove the filter plate after solidification.<\/p>\n