{"id":5191,"date":"2019-06-14T03:07:32","date_gmt":"2019-06-14T03:07:32","guid":{"rendered":"http:\/\/www.adtechamm.com\/?p=5191"},"modified":"2019-06-14T03:11:08","modified_gmt":"2019-06-14T03:11:08","slug":"aluminium-casting-line-metal-degassing-machine","status":"publish","type":"post","link":"https:\/\/www.adtechamm.com\/tr\/aluminium-casting-line-metal-degassing-machine\/","title":{"rendered":"Al\u00fcminyum D\u00f6k\u00fcm Hatt\u0131 Metal Gaz Giderme Makinesi"},"content":{"rendered":"

Al\u00fcminyum D\u00f6k\u00fcm Hatt\u0131 Metal Gaz Giderme Makinesi<\/strong><\/p>\n

AdTech Metal Degassing Machine is installed between the furnace and the casting machine to remove hydrogen and other residues from the molten aluminum and its alloys that affect its quality and mechanical properties. It has dual functions: handling and heating. Mainly used for melt purification of high-precision aluminum products.<\/p>\n

\u015eu \u00e7evrimi\u00e7i gaz giderme ekipman\u0131<\/a> mainly processes molten aluminum containing a certain amount of hydrogen and other residues (alkali metal, slag inclusion), and is removed after being treated by a degassing device.
\nThe principle of on-line degassing equipment is the principle of gas flotation. The process gas (inert gas or a mixture of inert gas and chlorine gas) is injected into the melt through the rotor and broken by the rotor into uniformly dispersed microbubbles, and the microbubbles rise to the melt. Surface, the tiny bubbles rise during the process of completing the following work:
\nHydrogen is adsorbed into the bubble and excluded;
\nAlkali metal, klor ile kimyasal etkile\u015fim yoluyla (klor\u00fcr olu\u015fumu) ayr\u0131\u015ft\u0131r\u0131l\u0131r;
\nKatk\u0131 maddeleri kabarc\u0131klar taraf\u0131ndan hapsedilir ve ard\u0131ndan eriyik y\u00fczeyine y\u00fckselerek c\u00fcruf olu\u015fturur.<\/p>\n

Aluminum liquid Metal Degassing purification operation process<\/strong>
\n1. Purpose and scope: The production of aluminum liquid by hydrogen removal, on-line filtration, removal of impurities and hydrogen inside the aluminum liquid, to ensure that the quality of the flat ingot meets the requirements.
\n2, the operator: foundry
\n3, the use of tools: small slag box, slag shovel, ceramic filter plate, graphite rotor, plugging and so on.
\n4. Use gas: N2, Ar or Cl2<\/p>\n

\"Al\u00fcminyum<\/p>\n

Online Aluminium Metal Degassing Operation<\/strong>
\n1. Control the holding furnace to tip over, so that the aluminum water in the flow tank smoothly flows into the dehydrogenation furnace, and at the same time, the asbestos wool at the aluminum outlet of the degassing box is opened.
\n2. Adjust the N2 or Ar pressure to 0.6 MPa and the flow rate per rotor is 4 m3\/h.
\n3. Open the chlorine control valve, adjust the pressure to 0.3 Mpa, and the flow rate is 0.04 m3\/h, so that Cl2 can smoothly enter the main airflow.
\n4. During the casting, the use of the heater is determined according to the temperature of the aluminum liquid in the degassing tank.
\n5. After the aluminum liquid is cast, use the asbestos to block the aluminum outlet of the degassing box, open the middle baffle, and clean the trough.
\n6. Close the argon valve and use Ar during the holding period to adjust the flow rate to 1 m3\/h per rotor.
\n7. Confirm that the heater in the degassing box is working properly during the heat preservation period.
\n8. If it is necessary to replace the graphite rotor or replace the alloy or shut down the furnace, it is necessary to carry out aluminum and slag removal operations.
\na. Close the various gas valves, stop the graphite rotor from rotating, and turn off the heater.
\nb. Use the electric hoist to lift the single rotor degassing box cover and rotate 900 while cleaning the graphite rotor and the aluminum slag on the heater.
\nc. Open the Evans degassing box to release the aluminum port, start the hydraulic cylinder, tilt the box, and pour the aluminum liquid into the slag tank.
\nd. Clean the aluminum slag in the tank with a slag cleaning tool.
\ne. Start the hydraulic cylinder, reset the cabinet, cover the furnace cover, and inflate the inflatable gasket on the cabinet.
\nf. Put a plug on the plug, block the aluminum outlet, and close the locking device.<\/p>\n