{"id":4747,"date":"2019-04-19T03:46:42","date_gmt":"2019-04-19T03:46:42","guid":{"rendered":"http:\/\/www.adtechamm.com\/?p=4747"},"modified":"2019-06-03T07:14:44","modified_gmt":"2019-06-03T07:14:44","slug":"degassing-machine-buy-from-adtech-china","status":"publish","type":"post","link":"https:\/\/www.adtechamm.com\/tr\/degassing-machine-buy-from-adtech-china\/","title":{"rendered":"Adtech China\u2019dan Gaz Giderme Makinesi Sat\u0131n Al\u0131n"},"content":{"rendered":"

Adtech China\u2019dan Gaz Giderme Makinesi Sat\u0131n Al\u0131n
\nPlease contact sales@adtechamm.com, or call +86 371 87095601<\/p>\n

ADTECH, metalurjik malzeme \u00fcretimine odaklanmaya devam ediyor.
\nADTECH, metalurjik malzeme \u00fcretimine odaklanmaya devam eden ve International Enterprise taraf\u0131ndan takip edilen \u00f6nc\u00fclerden biridir.
\n1. Seramik K\u00f6p\u00fck Filtre
\n2. Gaz Giderme \u00dcnitesi
\n3. Filtre Kutusu
\n4. S\u0131cak \u00fcst d\u00f6k\u00fcm serisi
\n5. Rulo d\u00f6k\u00fcm nozulu
\n6. Flux serisi
\n7. Di\u011fer Metalurjik Malzemeler<\/p>\n

\"Gaz<\/p>\n

Degassing Machine Buy from Adtech, which is used in a fixed position to treat the metal contained in transfer ladles.
\nThe machine is equipped with a rotating graphite tool (Iance), composed by a shaft and a rotor, through which the inert gas (nitrogen or argon) is blown into the melt, in the form of small bubbles.
\nIn this way it is possible to eliminate the hydrogen dissolved in the alloy.
\nIn addition, the same treatment allows the removal of the non-metallic inclusions present in the alloy, which are dragged by the gas bubbles toward the surface by effect of flotation.<\/p>\n

Gaz Giderme Makinesi<\/a> Performans:
\n1. The aluminum water online degasser mainly processes the molten aluminum liquid containing a certain amount of hydrogen and other residues (alkali metal, slag inclusion), and is removed after being treated by the degassing equipment.
\n2. The principle of treatment is gas flotation.<\/p>\n

In Aluminium Degassing control, metal casting must complete two things
\n1. Prevent and minimize the introduction of hydrogen in the melt.
\n2. Pre-casting hydrogen. The Aluminium Degassing will focus on measurement and removal, usually introduced into the melt by a rotary degasser.
\nWhen the purge gas bubbles are introduced into the melt, they collect hydrogen as they float on the surface.
\nThe best case is that these hydrogen-saturated bubbles leave the melt and reduce the hydrogen content.
\nIn this case, from a thermodynamic point of view, the process efficiency is 100%, but as the gas content in the melt decreases, the equilibrium pressure of hydrogen in the bubble also decreases, so the purge gas required to remove residual hydrogen The amount must increase.<\/p>\n

\n
\n