{"id":9695,"date":"2021-09-01T02:50:46","date_gmt":"2021-09-01T02:50:46","guid":{"rendered":"http:\/\/www.adtechamm.com\/?p=9695"},"modified":"2021-09-01T03:03:39","modified_gmt":"2021-09-01T03:03:39","slug":"foam-ceramic-filter-jsc-aluminium","status":"publish","type":"post","link":"https:\/\/www.adtechamm.com\/es\/foam-ceramic-filter-jsc-aluminium\/","title":{"rendered":"Filtro cer\u00e1mico de espuma Jsc de aluminio"},"content":{"rendered":"

Foam Ceramic Filter Jsc Aluminium is manufactured on the basis of a carrier with a fixed network structure and organic foam cells, and is used for the filtration and purification of molten aluminum.<\/strong>
\nThe foam filter is mixed into the thixotropic alumina slurry through an automated production line, and the slurry is evenly deposited on the foam skeleton of the carrier after being dried and solidified. It is then fired at a high temperature of 1180\u00b0C to form the final product.<\/p>\n

\"Filtro<\/p>\n

Aluminum has good light reflectivity and reflects ultraviolet rays more strongly than silver. The purer the aluminum, the better the reflectivity. The vacuum aluminizing process is widely used to manufacture high-quality mirrors. Vacuum aluminum plating
\nThe combination of the thin film and the polysilicon thin film becomes a cheap and light solar cell material. Aluminum powder can maintain silver-white luster and is widely used in the manufacture of coatings, commonly known as silver powder.<\/p>\n

Foam Ceramic Filter Jsc Aluminium is used to filter the impurities in molten aluminum alloy, helping to meet the production requirements of high-quality precision castings made of high-tech aluminum alloys (such as computer hard drives, PS substrates). Used for printing, preserving materials, turbojet fan blades, etc.<\/strong><\/p>\n

Los filtros de espuma cer\u00e1mica pueden eliminar grandes cantidades de este tipo de impurezas del aluminio fundido. La tecnolog\u00eda de filtraci\u00f3n con espuma cer\u00e1mica se ha convertido en el principal m\u00e9todo de filtraci\u00f3n de aleaciones de aluminio comerciales en todo el mundo.
\nGracias a sus bajos costes de instalaci\u00f3n y funcionamiento, as\u00ed como a su facilidad de uso, esta tecnolog\u00eda se extendi\u00f3 r\u00e1pidamente a fundiciones de aluminio de diversos tipos y niveles de complejidad.<\/p>\n

Over the years, it has been steadily developing towards the use of finer pore filtros de espuma cer\u00e1mica<\/a> to provide higher melt cleanliness, which is a requirement for the continuous improvement of the quality of aluminum processed products.
\nPor ejemplo, en la fabricaci\u00f3n de los paneles del cuerpo de las latas de aluminio, actualmente se utilizan habitualmente filtros de espuma de 40 y 50 orificios por pulgada (PPI) en la producci\u00f3n de dichos paneles.
\nAdem\u00e1s, actualmente se est\u00e1 evaluando un filtro de poros m\u00e1s finos.
\nSin embargo, el uso de filtros de poros m\u00e1s finos requiere un tratamiento previo exhaustivo para reducir el nivel de impurezas y evitar que el filtro se obstruya prematuramente o quede bloqueado por impurezas residuales.
\nLas part\u00edculas s\u00f3lidas, como los \u00f3xidos, los carburos, los nitruros y los compuestos de b\u00f3rax presentes en los metales (como el aluminio), as\u00ed como las inclusiones insolubles en l\u00edquidos (como las sales fundidas), afectar\u00e1n de manera significativa a la plasticidad y al metal final durante la deformaci\u00f3n por laminaci\u00f3n o extrusi\u00f3n. Calidad de la superficie.<\/p>\n