{"id":9384,"date":"2021-06-28T03:12:01","date_gmt":"2021-06-28T03:12:01","guid":{"rendered":"http:\/\/www.adtechamm.com\/?p=9384"},"modified":"2021-06-28T03:12:18","modified_gmt":"2021-06-28T03:12:18","slug":"italy-china-foundry-filter","status":"publish","type":"post","link":"https:\/\/www.adtechamm.com\/es\/italy-china-foundry-filter\/","title":{"rendered":"Italy China Foundry Filter"},"content":{"rendered":"

Italy China Foundry Filter adopts the principle of adsorption to filter<\/strong>, which can effectively remove large inclusions in molten aluminum and can effectively adsorb small inclusions.
\nNo broken pieces fall, effectively reducing the pollution of molten aluminum.
\nExcelente resistencia al choque t\u00e9rmico; mejora la resistencia a la erosi\u00f3n del metal fundido.
\nAutomatic flow production, 3 calibration procedures, accurate size, and close fit with the filter bowl.
\nMejorar el aspecto y las prestaciones de la superficie, y purificar el aluminio fundido.<\/p>\n

10Ppi, 20Ppi, 30Ppi, 40Ppi, 50Ppi, 60Ppi ceramic foam filter<\/strong>
\n10 PPI cast foam filter means that there are 10 honeycomb holes on a square inch of filter sponge.
\nLa esponja filtrante de 30 PPI tiene 30 peque\u00f1os orificios en una pulgada cuadrada. Cuanto mayor es el valor, m\u00e1s peque\u00f1os son los orificios.
\nGenerally, 15-20 PPI is large pores, 25-30 PPI is medium pores, and 35 PPI and above are small pores.
\nThe 10-50Ppi alumina ceramic foam filter has a porosity of over 97% and an open porosity of 99%. Good air permeability and high mechanical strength. Therefore, it has the characteristics of small flow resistance and high filtration efficiency.<\/p>\n

\"Italy<\/p>\n

Adtech ceramic foam filter material has the characteristics of light weight<\/strong>, high mechanical strength, large specific surface area, high porosity, good thermal shock resistance, corrosion resistance, excellent performance, and competitive price. It is specially designed for filtering liquid metal impurities. .
\nDue to the distributed pore network structure, the specific surface area can be increased, the sintered ore can be absorbed, the liquid metal becomes more pure, and the waste quality problems such as sand holes and air holes are greatly reduced. The mold quality has also been greatly improved.<\/p>\n

Italy China Foundry Filter can make the aluminum liquid fill the cavity more uniformly<\/strong>, and the molten metal has a greater tendency to turbulence during the casting process.
\nThe turbulent flow is finally transformed into a very stable laminar flow through the three-dimensional pore structure of the Filtros Asian Foundry<\/a>.
\nThe laminar flow fills the cavity better, reduces the impact corrosion of the metal solution on the casting cavity, and significantly reduces the rejection rate.<\/p>\n

Italy is a European country, mainly composed of the Apennines in southern Europe and two islands in the Mediterranean, Sicily and Sardinia.<\/strong>
\nThe country has an area of \u200b\u200b301,333 square kilometers and a population of 60.24 million.
\nThe northern Alps borders France, Switzerland, Austria, and Slovenia, and its territory is surrounded by two miniature countries-San Marino and the Vatican.<\/p>\n

Italy is poor in natural resources, with only water power<\/strong>, geothermal energy, natural gas and other energy sources, marble, clay, mercury, sulfur, and a small amount of lead, aluminum, zinc and bauxite and other mineral resources.
\nOil and natural gas production can only meet a small part of the domestic market demand, and 75% of energy supply and main industrial raw materials rely on foreign imports.
\nItaly’s traditional important renewable energy sources are geothermal and hydropower. Geothermal power generation is the second largest in the world after the United States, and hydropower is the ninth largest in the world.
\nItaly has always attached great importance to the development of solar energy. In 2011, Italy was the country with the world’s largest photovoltaic installed capacity (accounting for one-fourth of the world share). Italy’s domestic renewable energy supply ratio has reached 25% of total energy demand. In 2008, the renewable energy power generation capacity A year-on-year increase of 20%.<\/p>\n