![\"Fundente](\"http:\/\/www.adtechamm.com\/wp-content\/uploads\/2020\/08\/Al-Alloy-Refining-Flux.jpg\")
<\/p>\nAl Alloy Refining Flux is used in a variety of aluminum alloy melts and can be used for pure aluminum smelting, refining and slagging.
\nWhen using, just sprinkle the refining agent on the surface, then quickly dissolve it in the aluminum liquid, and then fully stir it.
\nSi se utiliza un chorro, lo mejor es emplear un gas inerte para inyectar el agente refinado; por ejemplo, se puede optar por el nitr\u00f3geno o el arg\u00f3n.<\/p>\n
Al Alloy Refining Flux is mainly used to remove hydrogen and scum in aluminum water, as well as high-temperature melt purification (refining) treatment of aluminum alloy. Its basic function is to remove internal inclusions and hydrogen in high-temperature melt.
\nEsto hace que el aluminio fundido sea m\u00e1s puro y, adem\u00e1s, contribuye a eliminar las escorias.
\nAlgunos componentes del concentrado de aluminio se descomponen f\u00e1cilmente a altas temperaturas, y el gas generado puede reaccionar con el hidr\u00f3geno, adsorberse fuertemente a la escoria y escapar r\u00e1pidamente de la masa fundida, contribuyendo as\u00ed a la eliminaci\u00f3n de la escoria.<\/p>\n
<\/p>\n
Al Alloy Refining Flux is a powdery granule. It is a special refined dust collector, sprayed by carrier gas (nitrogen or argon) to the bottom of the molten pool, thereby forming a large number of bubbles in the aluminum liquid. The bubbles float upward from the bottom. The medium is in full contact with the molten metal, and the gas and inclusions in the molten aluminum are brought to the surface of the molten aluminum through physical and chemical effects, and the purpose of degassing and slag removal is achieved at the same time. After a large number of applications, the refining agent has been proved to be pure aluminum. The degassing and slagging effect of aluminum alloy is remarkable.<\/p>\n