{"id":4727,"date":"2019-04-19T02:11:13","date_gmt":"2019-04-19T02:11:13","guid":{"rendered":"http:\/\/www.adtechamm.com\/?p=4727"},"modified":"2019-06-03T07:41:25","modified_gmt":"2019-06-03T07:41:25","slug":"degassing-aluminum-with-chlorine","status":"publish","type":"post","link":"https:\/\/www.adtechamm.com\/es\/degassing-aluminum-with-chlorine\/","title":{"rendered":"Desgasificaci\u00f3n del aluminio con cloro"},"content":{"rendered":"

Desgasificaci\u00f3n del aluminio con cloro<\/strong><\/p>\n

Degassing Aluminum With Chlorine is a major primary aluminum purification process using a gas mixture of chlorine, nitrogen or chlorine.
\nDesgasificaci\u00f3n del aluminio con cloro
\nPreviously, reactive gas chlorine was used as a purifying agent (chlorination method). In the chlorination method, when chlorine gas is introduced into the aluminum liquid, a lot of abnormally small AlCl3 is formed, and the bubbles are sufficiently mixed in the aluminum liquid.
\nHydrogen dissolved in the aluminum liquid, as well as some mechanical inclusions, are adsorbed on the AlCl3 bubbles, and are discharged as the AlCl3 bubbles rise to the surface of the aluminum liquid.
\nWhen chlorine is introduced, some elements that are more negatively charged than aluminum can be chlorinated, such as calcium, sodium, magnesium, etc., which are separated by chlorine gas to form corresponding chloride.
\nTherefore, the chlorination method is a very effective primary aluminum purification method. The amount of chlorine gas is 500-700g per ton of aluminum.
\nHowever, because oxygen is toxic and relatively expensive, in order to avoid air pollution and reduce the cost of aluminum ingot production, the chlorination process has been gradually abolished into an inert gas-nitrogen purification method in the modern aluminum industry.<\/p>\n

\"Desgasificaci\u00f3n\"Desgasificaci\u00f3n<\/p>\n

Desgasificaci\u00f3n del aluminio con nitr\u00f3geno<\/strong>
\nAlumina balls (418 mm) were used as the filter medium. N2 is directly introduced into the aluminum liquid.
\nThe aluminum liquid is continuously fed into the purification furnace, passed through the alumina ball filtration layer, and is flushed with nitrogen, so that the non-metallic inclusions and dissolved hydrogen in the aluminum liquid are removed, and then continuously discharged, thereby uniformly distributing the fine nitrogen bubbles. It acts as a purifying agent in the treated aluminum liquid.
\nNitrogen has no pollution to the atmosphere, and the purification treatment is large. It can process 200-600kg of aluminum liquid per minute, and the amount of aluminum loss caused by the purification process is relatively reduced, so it is widely used now.
\nBut it does not remove calcium, sodium, and magnesium from aluminum in the same way as chlorine.<\/p>\n

Degassing Aluminum With Chlorine and Nitrogen<\/strong>
\nA mixture of chlorine and nitrogen is used to purify the aluminum liquid, which acts to remove hydrogen and separate oxides on the one hand, and to remove certain metal impurities (such as magnesium) from aluminum on the other hand. The usual composition is 90% nitrogen and 10% chlorine.
\nThere are also 10% chlorine + 10% carbon dioxide 80% nitrogen. This effect is better, carbon dioxide can make chlorine and nitrogen diffuse well, which can shorten the operation time.<\/p>\n

ADTECH sigue centr\u00e1ndose en la fabricaci\u00f3n de material metal\u00fargico.<\/p>\n

ADTECH es una de las empresas pioneras del sector, a la que sigue la International Enterprise, y que sigue centr\u00e1ndose en la fabricaci\u00f3n de materiales metal\u00fargicos.
\n1.Filtro de espuma cer\u00e1mica<\/a>
\n2. Unidad de desgasificaci\u00f3n
\n3. Caja de filtros
\n4. Serie de fundici\u00f3n con base caliente
\n5. Boquilla de fundici\u00f3n por rodillo
\n6. Serie Flux
\n7. Otros materiales metal\u00fargicos<\/p>\n

SALES@ADTECHAMM.COM<\/p>\n

\n
\n