Ceramic Filtration Tag

Ceramic Foam Filter Casting is mainly used for the filtration and purification of aluminum and alloy liquid in foundries with excellent resistance to corrosion and corrosion of aluminum liquid. It can effectively remove inclusions, reduce trapped gas, provide laminar flow, and the filtered metal is significantly cleaner. Cleaner...

Ceramic Filter Cff is widely used in the production of large aluminum processing enterprises in Russia, the Middle East and Southeast Asia. During use, it is not only necessary to remove the aluminum melt inclusions, but also to avoid the blockage of the Ceramic Filter Cff...

Porous Ceramic Filter Factory meets high quality standards and has excellent homogeneity. They have a variety of pore sizes and can be used for Ceramic Foam Filter of all common metals such as iron, stainless steel and aluminum. As an excellent Porous Ceramic Filter Factory, we have...

Foundry Filter Factory produces aluminum water foam ceramic filter plates, which use a three-dimensional network structure and organic bubbles connected to the holes as a carrier to penetrate thixotropic alumina slurry. The slurry was uniformly applied to the foam skeleton of the carrier, and baked and...

Casting Filter Factory is constantly pursuing the best technology available on the market to produce the best quality aluminum ingots, aluminum round bars or aluminum strips for its customers. Our guarantee will not stop at customers, but will continue to provide customers with quality products!...

Zirconia Filter Factory produces a new type of industrial ceramic products for aluminum melting and casting purification. It has a low bulk density (0.25-0.65) g/cm3, high porosity (60%-90%) and a three-dimensional network structure. Due to its excellent properties such as high temperature resistance, chemical corrosion resistance, and...

Sell ​​Ceramic Foundry Filter which can improve the quality of finished products (foil, block, ingot, rod, profile, etc.) and meet the requirements of high purity cast metal. It reduces the scrap rate of the final product and improves the quality. The filter usually uses a standard...

Rus Aluminium requires that the selection of ceramic foam filters should be based on the quality requirements of the casting and the number of inclusions in the molten metal to determine the pore size of the filter. The size of the filter is determined according...

30 Ppi Filter Foam Ppi indicates the number of inches per inch. The higher the ppi value in the filter plate, the more holes per inch, the smaller the holes, and the better the filtration effect. If the hole is too small, the aluminum alloy will not...