Aluminum Degassing Flux Tag

Molten Aluminum Refining is a compound that is added to the molten aluminum bath to improve the quality of castings. They are mixed for specific processes and application areas. Flux assists in surface protection, scum treatment, furnace wall cleaning, metal cleaning, hydrogenation and crystal refinement. Aluminum...

Refining Agent can make the structure of aluminum alloy ingots uniform and small, fully deteriorated, and free of slag inclusions and other defects. Deslagging and degassing are two important and difficult points in the purification of aluminum alloy melt. The refining flux used in the purification...

Refine Agent is an important part of the aluminum liquid refining process with the addition of aluminum alloy reheating material. It removes the gas and slag in the aluminum liquid, and improves the aluminum alloy smelting process to improve the purity of the aluminum liquid Oxidized...

Refine Flux smelts aluminum and aluminum alloys, and has a better degassing and impurity removal effect, which can make the hydrogen content in the aluminum alloy melt lower, and can more effectively reduce the burning loss of the metal. At the same time, the refining agent...

Rotary Degassing Equipment is carried out between the casting (or metal holding) furnace and the casting machine. Such a metallurgical launder can have a slight inclination from the casting furnace to the casting machine, and is suitable for the flow of molten metal from the...

Online Degasser achieves stable operation by changing the power transmission mode of the rotor, so that the rotor can run at high speed, thereby removing the H. in the molten aluminum. Currently, it is usually 300 to 450 rpm, and the maximum is 600 rpm. After changing...

Rotor Online Al Melt Degasser allows nitrogen gas to enter the aluminum melt to generate discrete fine bubbles. According to the principle of partial pressure, the hydrogen dissolved in the aluminum melt is under the effect of the pressure difference. Continue to diffuse into the bubble. When...

Rotors Degassing Machine is mainly used for the purification of liquid aluminum. It is the purification process of liquid aluminum alloy and the main method to improve the comprehensive performance of aluminum alloy. In the purification treatment process, the method of mixing the purification gas and...

Nitrogen Degassing Unit is used to reduce the oxide and hydrogen in the aluminum liquid, reduce the loss of aluminum and refining agent in the slag removal process, and also reduce the oxide deposition on the furnace wall. Through automatic cycle refining timing and setting, automatic...