News

Foam Ceramic Filter Plate Using Method The foam ceramic filter plate produced by our company can effectively remove all kinds of impurities in the aluminum liquid, and the sealing ceramic fiber gasket is affixed around the filter plate, which helps to seal the filter plate in...

Ceramic Filter Plate PAL Introduction Ceramic Filter Plate PAL is an aluminum-water foam ceramic filter, which adopts a three-dimensional network structure and an organic bubble communicating with pores as a carrier, infiltrates the thixotropic alumina slurry, and uses a four-center correction center distance automatic extrusion process. The slurry...

Adtech supplies to these Foundries ADTECH is one pioneer following by the International Enterprise, who keeps focusing on the manufacture of the metallurgical material. 1.Ceramic Foam Filter 2.Degassing Unit 3.Filter Box 4.Hot-top casting series 5.Roll casting nozzle 6.Flux series 7.Other Metallurgical Material Adtech supplies to these Foundries as followings: ASF- Architectural Street Furnishings RPA Components Ltd SINO-MINEMET...

Flux Used In Metallurgy Covering and Drossing Fluxes (low-fluoride, low- and high-temperature, and sodium-free types available) Aluminum is chemically very active. A tough film or skin of aluminum oxide forms quickly on all freshly exposed surfaces, especially in the molten state. Scrap or ingot additions to the melt,...

Ceramic Fiber Castertip Ceramic Fiber Castertip is the key parts of the continuous aluminum trip casting machine which directly effect the quality of aluminum sheets. The castertips can be divided into many types according to different casting machines. Aluminum silicate caster tips produced by our plant...

Purdue Aluminium Flux Research develops process to boost strength and ductility of aluminium alloys Purdue Research announced last month that researchers have developed technology that can change aluminium’s microstructure to boost ductility and offer strength equivalent to stainless steel. The technology is meant to do away with...

Alumina Refinery Aluminium Refining Process Abstract A salt melt of alkali and/or alkali earth chlorides and fluorides, heated to 50°-100° C. above the melting point is employed to purify heavily contaminated scrap aluminum. The scrap aluminum, preheated to 400°-500° C. is added to a melting or holding...