Aluminium Italy Filter Foundry

Aluminium Italy Filter Foundry

Aluminium Italy Filter Foundry

Aluminium Italy Filter Foundry uses foam and high-purity ceramics as raw materials to effectively remove the non-metallic solid mixture of molten aluminum and aluminum alloy flux in the aluminum casting industry.

The ceramic foam filter Al2O3 is designed for cast metal. Because of the formation of a “filter cake” on the side of the inlet filter, and because of the deep filtration inside the ceramic matrix.

Alumina ceramic foam filters are mainly used in the purification process of producing aluminum and aluminum alloys. With the increasing requirements for the quality of aluminum products, the application of Filter Foundry will become more and more extensive.

Ceramic foam filter Dimention

Ceramic foam fitler Pore Size (PPI): 10/20/30/40/50/60

Aluminium Italy Filter Foundry

The Al2O3 function of Aluminium Italy Filter Foundry is limited by the open 3D structure of the ceramic matrix created by the interconnected unit system. They have good thermal conductivity, stability and resistance to sudden temperature changes.

The advantages of Adtech’s ceramic foam filter production of aluminum castings:
Uniform pore size, high porosity, correct sintering, high bending and compressive strength, and effective filtration.

Aluminium Italy purchased Filter Foundry through, used for continuous casting, semi-continuous casting, gravity casting and low pressure casting aluminum flux filter equipment.
The technologists of Aluminium Italy believe that the ceramic foam filter is an effective tool to achieve the metallurgical purity of molten metal during the casting process. The filter also stabilizes the filling of the mold, thereby preventing undesirable defects in the casting.

No Comments

Sorry, the comment form is closed at this time.